I also think so, here is the spec for the N2 race engine:
4AGE 16V N2 Race engine.
It's included:
1. Mikuni Solex Side Draft
2. Trumpet for the Solex
3. TRD adapter for Mikuni Solex side draft for 4AGE and other complete kit
4. Fully ported & polish 4AGE 16V head.
5. HKS Race CAM 288 degree both side
6. TRD metal head gasket
7. After market high compression piston
8. Fully balance engine
9. after market crankshaft and conrod bearing
10. TRD spark plug cable
11. Adjustable cam pulley
12. After market fuel pump specific for Solex
13. After market coil
14. Ultra ignition booster and complete ignition kit for this engine.
But you compare the 4A and the 7A. You need to put more money in the 4A and it would need very high revs to make power 9K-11K? The 7A would probably be pushing the same power with lower revs. But then again, we could go into debate about street credentials vs usable driving.
I am looking for a piggyback ecu for my 4g93 NA... there two is between my budget but i want to know the diff between this two.... E manage blue and Unichip Q ah..... which will be better for my setup up... CAn say...
Now that we are all returning to our daily lives after the Hari Raya holidays, What say u we have a nice seafood dinner either in Telok Gong or Tanjung Harapan "Bagan" in klang..It would be a good meet n...
I need help regarding the bumper.
How to install it to my WIRA?
Do we need to fabricate any support on the bumper and use the original brackect (how to spell it).