so how?....

[geeleven]

Hello to all daihat guruss...

My current ride is a stock stended G11 with some probs with the steering rack and a lot of tikus in the back seat...(never seen but always can hear one)

Thinkin of converting to GTTi engine but don know how.. .any advice on the cost and specialists?

Thanks... :)

 

[Aura]

PM or call Cateye..He can guide you what the step next! Welkam to GTTi club!!!

 

[gtti_kuning]

Hello to all daihat guruss...

My current ride is a stock stended G11 with some probs with the steering rack and a lot of tikus in the back seat...(never seen but always can hear one)

Thinkin of converting to GTTi engine but don know how.. .any advice on the cost and specialists?

Thanks... :)

wut sort of advice do u need??
cost wil be like this..
hakat:RM3500++
instalation:RM1000++(depends on wut thing u change inside)

 

[cb70]

Aloha geeleven,

Now worry man...eventhough hakat for GTti is quite expensive , but you shoukd take into considerations 2 important facts about GTti engine
1. Engine is durable aka tahan lasak
2. The fastest 1000cc engine

 

[Aura]

Racun dia! Racun dia! Hahahahaha..

 

[gtti_kuning]

Aloha geeleven,

Now worry man...eventhough hakat for GTti is quite expensive , but you shoukd take into considerations 2 important facts about GTti engine
1. Engine is durable aka tahan lasak
2. The fastest 1000cc engine

ahaks....:D
come on just do the transplant..
n u will not regret...

 

[geeleven]

selamat ker g11 masuk enjin GTti?..what about workmanship? Any recommended workshops?

JPJ can approve or not? Aiyoo too many questions lah...

 

[gtti_kuning]

selamat ker g11 masuk enjin GTti?..what about workmanship? Any recommended workshops?

JPJ can approve or not? Aiyoo too many questions lah...

wut about workmanship dat u wanna know??
JPJ sure can approve one lor..
i just did mine recently n no problem at all(of course got help from insider lor..:D)

 

[cb70]

hi geeleven,

should be no problem in converting to gtti from standard..coz, ur current engine is 1.0 & so goes the gtti, same cc maa..Just need to change the engine number in the "geran" only rite GTti kuning?

 

[gtti_kuning]

hi geeleven,

should be no problem in converting to gtti from standard..coz, ur current engine is 1.0 & so goes the gtti, same cc maa..Just need to change the engine number in the "geran" only rite GTti kuning?

yup....
no problem with JPJ or PUSPAKOM i think...
but i dunno wether GTti engine can fit into G11 ngam2 or not...
maybe got mod mounting....

 

[cateyes]

yup....
no problem with JPJ or PUSPAKOM i think...
but i dunno wether GTti engine can fit into G11 ngam2 or not...
maybe got mod mounting....

Mouting have to custom but only one mounting on the right hand site.Dry shaft left n right must be custom but for me only right hand site i custom(depends on mechanic).

Other then that.. cun cun fit in.


For JPJ n puspakom can lepas.DOnt worry.

 

[Aura]

No need Puspakom lar..Onli JPJ..No need to bring car, just at the counter..

 

[cateyes]

No need Puspakom lar..Onli JPJ..No need to bring car, just at the counter..

No need aa?how u know??hehehehe..Anyway my convertion goes to puspakom.. up to u want or not.. ;)

 

[gtti_kuning]

No need aa?how u know??hehehehe..Anyway my convertion goes to puspakom.. up to u want or not.. ;)

wut??
u didnt go 4 puspakom inspection ar??
mine also go...

 

[Aura]

Actually my pomen do all..About the registration, Abang Mael C&C told me that..

 

[gtti_kuning]

Actually my pomen do all..About the registration, Abang Mael C&C told me that..

owh...
so u got somebody helped u la...
erm..
no wonder la didnt go 4 inspection...:D

 

[geeleven]

seriously guys which shop would you recommend for me to do the conversion?...Mr Cateye mentioned some modification to the drive shaft...so must be reputable mechanic to do that sort of modification...bayar bulan-bulan boley ke?.. :)

 

[gtti_kuning]

seriously guys which shop would you recommend for me to do the conversion?...Mr Cateye mentioned some modification to the drive shaft...so must be reputable mechanic to do that sort of modification...bayar bulan-bulan boley ke?.. :)

bro..
if ur in sbn i can recommend u 2 my pomen..
but ur not from here i think so....

 

[Aura]

He's from TPG..I don't know where..Probably Taiping kot..Or Taiwan..Erkk..Jauh lak bunyinya..

 

[Speed Demon]

Measure the width and length of the engine and also your engine bay. It will be a tight fit but it most probably can go in.

Engine mountings and also driveshafts have to be modified. You also have to check the suspension and brake systems.

For driveshafts, you should custom make them. Cutting and welding the GTti driveshafts is NOT SAFE.

If you don't have RM5000 and above, don't do this conversion. Remember the engine you are installing in is also not new, so you might have to change/repair some things in it too.