One side tyre wear problem

[vr2turbo]

vr2turbo,

you missed out my saying "...drive slower...." part.

No need, Bro. volec already quoted he drives slow mah!......hhahhahahhahahah

 

[tth tyre]

Drive safely are more important...

 

[hex999]

My friend had a similar problem, due to previous owner met with an accident, caused chassis to not be aligned. Sent to bodyshop, re allign the chasis and never had issues

Or the tyre shop your going to might have be using tools which are not accurate or not calibrated properly, try another shop

 

[6UE5t]

From the photo, tire wear still looks even.

 

[vr2turbo]

From the photo, tire wear still looks even.

Tyre wear is even, only thing is left side wearing faster, so he rotate/swap....

 

[6UE5t]

Tyre wear is even, only thing is left side wearing faster, so he rotate/swap....

That's what I meant also, seems still similar wear for left & right side.

 

[C99D-MMC5537]

What about brake balance? Ride height same between left n right? Have u changed to new absorber top mounting only on one side before?

 

[^pomen_GTR^]

i like parada tyre...quite grippy but soft sidewall...good for comfort driving with rare spirited driving..just complain about the noise...


btw...that sure confirm camber problem..need more kangkang....

last time while im using parada......right tyre camber -2. and left camber -1.5 (right more than left because compensate more to highway exit ramp)...
your case more like roundabout too many in your place...so set left camber more than right,.....that should be solving your problem right away.....

 

[Veloc]

What about brake balance? Ride height same between left n right? Have u changed to new absorber top mounting only on one side before?

Changed both moutings....

i like parada tyre...quite grippy but soft sidewall...good for comfort driving with rare spirited driving..just complain about the noise...


btw...that sure confirm camber problem..need more kangkang....

last time while im using parada......right tyre camber -2. and left camber -1.5 (right more than left because compensate more to highway exit ramp)...
your case more like roundabout too many in your place...so set left camber more than right,.....that should be solving your problem right away.....

Bro that is a very good suggestion. I will keep that in mind! Thanks! This might just compensate for the roads around my area.

 

[vr2turbo]

Bro that is a very good suggestion. I will keep that in mind! Thanks! This might just compensate for the roads around my area.

But by the looks of your tyres, inside and outside even wear woh! Play with camber if your tyres wear either more on inside or outside....