MYVi 1.0L BOT - Need help!

[ftzone]

Guys and Gals,

I need the ECU pin outs for the MYVi 1.0. Using Fujitsu Ten ECU.
I need especially the throttle signal position. (for hooking up the SAFC NEO)
Help would be appreciated.

 

[Jack_Hon]

Guys and Gals,

I need the ECU pin outs for the MYVi 1.0. Using Fujitsu Ten ECU.
I need especially the throttle signal position. (for hooking up the SAFC NEO)
Help would be appreciated.

try check at TPS, with using multimeter 0 to 4.9v ..........then u will get it whre is the TPS signal

 

[ftzone]

uh... where is the throttle position sensor?

 

[ftzone]

Anyone can help?

Bolt on turbo is all done, car is running.
Fuel tuning by SAFC NEO. But currently no Throttle Position settings....

A picture by the way. taken during half way through the process.