Mivec Club

[boyzone]

All mivec sifu ..

Pls help, I have encounter a big problem on my mivec engine ..
my engine can be die off when I'm slow down and press in the clutch at the junction . I noticed this problem only happened when I run with air con.
without load in air con, everything is look fine.
I have check on my ISC step motor and idling, all are good and stable nothing wrong with them. Any idea ?? Pls help .... Thanks

 

[ky2004]

anyone know about Mitsu MIVEC V6 Turbo? heard came from FTO but no idea from which gen? i'm thinking to get a perdana.. so planning to convert the engine. any idea which better+reliable between MIVEC V6 and TwinTurbo engine?

 

[ykyong]

hello to all the mivec brother,
ken !!! can i know last time how much u paid to jpj for upgrade ur 1.6mivec to 1.8 mivec ?

 

[spyderslr]

if ur car originally comes with 4G13, then it'll cost u at least 1k for runner fee n 1-2 months for the whole process.....very very very very troublesome n bitchy la......they dont care whether ur current running engine is 1.6 or not, they look at ur original engine that ur car came wif......just did mine n now waiting for the reg card to b altered n renew roadtax....zzzzzz....

 

[ykyong]

if ur car originally comes with 4G13, then it'll cost u at least 1k for runner fee n 1-2 months for the whole process.....very very very very troublesome n bitchy la......they dont care whether ur current running engine is 1.6 or not, they look at ur original engine that ur car came wif......just did mine n now waiting for the reg card to b altered n renew roadtax....zzzzzz....

so ur is 1.8 mivec ? how's the respone ? fast ? power ? sharing the information about it to everybody brother. thanks
mine car original engine was 1.5.. now is 1.6 mivec and planing going to have 1.8 mivec so how it cost about the jpj ?

 

[ZeNeGeR]

hello to all the mivec brother,
ken !!! can i know last time how much u paid to jpj for upgrade ur 1.6mivec to 1.8 mivec ?

are u refer to me ? i did not upgrade from 1.6 to 1.8 lah..

 

[ykyong]

are u refer to me ? i did not upgrade from 1.6 to 1.8 lah..

so how u get 1.8 ? u mean when u bought its already 1.8 ?

 

[ky2004]

ken's mivec was 1.6.... never updraded to 1.8.. same goes to ah loon.. all sifu only using 1.6 coz they know how to maximise the power from 1.6.. unlike me..hehehhe.... 1.8 will produce better toque compare to 1.6.. but not as reliable as 1.6 ....

 

[Henryfong]

All mivec sifu ..

Pls help, I have encounter a big problem on my mivec engine ..
my engine can be die off when I'm slow down and press in the clutch at the junction . I noticed this problem only happened when I run with air con.
without load in air con, everything is look fine.
I have check on my ISC step motor and idling, all are good and stable nothing wrong with them. Any idea ?? Pls help .... Thanks

confirm isc problem ....

 

[spyderslr]

wah all diam diam ubi.....zzzz.....hahaha.....1.5 to 1.8 should b ok i guess.....but still, need to wait for damn long lahh.....1.8 er...?...u get alot more torque ler for sure.....hehehe

 

[nickchl]

I am selling my Satria 1.8 Mivec.
Anyone interested? PM me please.

Cheers!

 

[HyperRevved 6313]

ken's mivec was 1.6.... never updraded to 1.8.. same goes to ah loon.. all sifu only using 1.6 coz they know how to maximise the power from 1.6.. unlike me..hehehhe.... 1.8 will produce better toque compare to 1.6.. but not as reliable as 1.6 ....

Ken Satria Mivec was already upgraded to 1.8 before he sell the car .....

 

[boyzone]

confirm isc problem ....

But I have took out the ISC check on the coil conductivity, all the coils reading are showed good with around 28 to 33 ohm. Pls advise.

 

[ky2004]

ehh..ya ka ahloon?the time u install MINES ecu for him , he still using 1.6 rite? me also dunno when he upgrade to 1.8. just before he sell off the car?

 

[mivec4g92]

All mivec sifu ..i wan to ask y my engine rpm very high....at 90 km/h already 3000rpm at gear 5.....converted to mivec-md....thx

 

[QuarterMile]

Its normal for that reading.This is due to its final drive(close ratio).
If it were to be any lower u should be worrying bcoz they might have swap the local gearbox for your mivec gearbox.
Btw y did u get MD?

 

[mivec4g92]

oh.... thx.....i get MD becoz i thought that there are no different betw mivec

 

[feezdya]

to all otai2 mivec...no tt??wish to join...

 

[feezdya]

help me:X-:

i wanna change my timing belt..if any1 knws plz pm me..i wan da price n all..wat rcomended timing belt 4 mivec?hmm wat saiz da mivec timing belt??im using mivec RS...tq

 

[ykyong]

hello, wah how come the mivec club become so " tim".. who got safc wanna let go please let me know, cos im looking one for my car.. thanks