mira l2 brake problem

  • See what others are reading now! Try Forums > Current Activity
  • Fixed New Thread missing Editor: Hi Everyone, the issue with posting a new thread or a reply that shows a missing editor has been fixed. More updates to the forums will be added on in the coming days, we apologize for the inconveniece this has caused
Joined
Aug 23, 2013
Messages
4
Points
501
Location
Kuala Lumpur
my l2 brake something wrong, sometime need press the pedal very down to brake the car.

already change new brake pads, brake pump no leaking.

anyone know how to solve its? thx...
 
my l2 brake something wrong, sometime need press the pedal very down to brake the car.

already change new brake pads, brake pump no leaking.

anyone know how to solve its? thx...

Do brake bleeding on all 4 brakes and check the brake hose condition. If the brake hoses are old, upgrade to steel braided brake hose.
 
after that check your brake servo, if u wanna DIY your braided hose, PM johnsonlam
 
thx all....
my brake servo sudah upgrade to l5, servo vacuum hose juga sudah tukar baru...
the brake still same, sometime ok, sometime need press very down...
 
thx all....
my brake servo sudah upgrade to l5, servo vacuum hose juga sudah tukar baru...
the brake still same, sometime ok, sometime need press very down...

Bro, take 1 liter of dot 4 brake fluid and ask the foreman do the bleeding again (keep on pump the fluid until the fluid come out is clean). Bleed all the 4 brakes until you feel there is a good bite (like normal, not deep deep style).
 
did u check ur rear brakes?? ur brake shoe or brake cylinder aka brake pump also will cause the problem, if the problem is not constantly, n the servo vacuum hose been chg, and done bleeding, mostly is from the servo.. sometimes master pump leak into servo cant be seen... especially l5
 

Posts refresh every 5 minutes




Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience
Top Bottom