Gen 2 Fan Motor Problem

  • See what others are reading now! Try Forums > Current Activity
  • Fixed New Thread missing Editor: Hi Everyone, the issue with posting a new thread or a reply that shows a missing editor has been fixed. More updates to the forums will be added on in the coming days, we apologize for the inconveniece this has caused
hai you can see the small screw at water pipe location right side same location for termostat other car don't have this screw ....how to remove the bubble ......open this screw but not remove it ....radiator cap must be lock and water tank must full after that start your engine the water must flow normal coming out from this hole if you see bubble coming out wait until it disappear make sure that the screw not jump out because you need to tight it back in engine running condition monitor your spare tank make sure it have water.......how long engine need to run?...........until your fan running in high speed..2 or 3x......make sure you monitor temp. also..... after that if you see there is no more bubble and water coming normally at the screw hole tight it back and refill back your spare tank ............start your engine again until 2 or 3x fan running at high speed and monitor your temp. if temp stable mean your problem already solve.WARNING please not open your radiator cap you can open it when engine and water is cold......thank
 
hai you can see the small screw at water pipe location right side same location for termostat other car don't have this screw ....how to remove the bubble ......open this screw but not remove it ....radiator cap must be lock and water tank must full after that start your engine the water must flow normal coming out from this hole if you see bubble coming out wait until it disappear make sure that the screw not jump out because you need to tight it back in engine running condition monitor your spare tank make sure it have water.......how long engine need to run?...........until your fan running in high speed..2 or 3x......make sure you monitor temp. also..... after that if you see there is no more bubble and water coming normally at the screw hole tight it back and refill back your spare tank ............start your engine again until 2 or 3x fan running at high speed and monitor your temp. if temp stable mean your problem already solve.WARNING please not open your radiator cap you can open it when engine and water is cold......thank

Thanks for the tip
 

Posts refresh every 5 minutes




Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience
Top Bottom