drive shaft

[neoz2b]

to all c foo's
i already search tru da forum, but not find any related topic with my prob.
my right drive shaft kong already.im using b16a engine (auto).but my left drrive shaft is still in good condition.
my Q is, should i change both or only change da right one only? if i buy it from chop shop, ok or not? is it xpensive? what else should i change?
thanx a lot bro's!

 

[Oderf]

how do u know ur drive shaft oredi kong ?

 

[devilangel]

bro, i hve the same problem with the same engine,
turn right or left "gogk gogk gogk" sound from the front,
after checking was told my drive shaft koyak, so changing
as per mech advise, was quoted RM RM390 per pc brand new
or RM 280 per pc 2nd hand siap pasang. Changing this weekend
will post feedback next week.

to all c foo's
i already search tru da forum, but not find any related topic with my prob.
my right drive shaft kong already.im using b16a engine (auto).but my left drrive shaft is still in good condition.
my Q is, should i change both or only change da right one only? if i buy it from chop shop, ok or not? is it xpensive? what else should i change?
thanx a lot bro's!

 

[greyrex]

Hie bro.The sound from left and right turn might be due to just the cv joint "kong" and not the whole driveshaft.CV joint should be in the range of RM120-RM150..if can,go for lobros or nkn.Both are quite good cv joints.Cheers!

 

[devilangel]

thanks bro, appreciate your feedback, will ask my mech to check on that as well.

Hie bro.The sound from left and right turn might be due to just the cv joint "kong" and not the whole driveshaft.CV joint should be in the range of RM120-RM150..if can,go for lobros or nkn.Both are quite good cv joints.Cheers!

 

[neoz2b]

the sound same la bro.but rm390, is it ori or local? since my mach said the new one quite xpansive.GREYREX, how can i identify which part is cv joint? and devil, did ur mech mantion to change ur bushing too?
thanx guys for reply.

 

[devilangel]

My mech said ori but local, nope didnt not advise me on bushings, but am checking with him on Sunday..

the sound same la bro.but rm390, is it ori or local? since my mach said the new one quite xpansive.GREYREX, how can i identify which part is cv joint? and devil, did ur mech mantion to change ur bushing too?
thanx guys for reply.

 

[greyrex]

the sound same la bro.but rm390, is it ori or local? since my mach said the new one quite xpansive.GREYREX, how can i identify which part is cv joint? and devil, did ur mech mantion to change ur bushing too?
thanx guys for reply.

Hie bro.Hope this link would help you to know more about the cv joints.Good luck.
http://www.samarins.com/glossary/cv_joint.html

 

[devilangel]

Thanks bro, much appreciated.

Hie bro.Hope this link would help you to know more about the cv joints.Good luck.

 

[neoz2b]

thanx a lot greyrex.devil, let me know after u see the mech.coz, if ur car already more than 9 years,u need to change those bushing. (my mech said so).

 

[devilangel]

no probs bro, guess everyone has to share info to help one another.
as for bushings, so far changed a few, too change the whole front & rear
will koyak my pocket :confused_smile: its blardy mahal sialll:Not_Impressed:

thanx a lot greyrex.devil, let me know after u see the mech.coz, if ur car already more than 9 years,u need to change those bushing. (my mech said so).

 

[greyrex]

Not at all bros.We're here to share.Anyway..will hear about your outcome then.Cheers!

 

[Oderf]

where u at bro ? i know this one driveshaft specialist in Klang....good workmanship with relatively reasonable price....somewhere on sg kandis...called ah kam...

 

[devilangel]

where u at bro ? i know this one driveshaft specialist in Klang....good workmanship with relatively reasonable price....somewhere on sg kandis...called ah kam...

bro, who lar, me or neo?..hehe..me in Puchong...

 

[neoz2b]

i'm at pandan indah.but thanx bro.already got a mech at pandan indah industrial park.

 

[M@L]

Urgently need help...

dear all sifus...

went to a workshop in tmn megah today...checked on my suspension too...coz have the same sound like some of u hondarians here...checked with the mech n found out that my rear bushing already 'kong'...rm360 per set..brand "Super Pro"...sifus..is this brand ok n the price?...or any other brand to recommend?...this brand from australia if not mistaken...then the workmanship cost rm180...

the front...i think driveshaft also 'kong'...all this 'kong' due to the darn big hole tat was at kinrara to puchong road there...sakit hati...anyway...where can find good workshop to fix this n wat brand or any recommendation like type r driveshaft etc etc...am new in this...please help asap...

any help much appreciate...thanks...

 

[devilangel]

bro, Super Pro is good, expensice but good. Drive shaft abt RM390 per set siap pasang or 2nd hand give or take abt RM280/-, if u want 2nd hand go look at
kedai potongz,

dear all sifus...

went to a workshop in tmn megah today...checked on my suspension too...coz have the same sound like some of u hondarians here...checked with the mech n found out that my rear bushing already 'kong'...rm360 per set..brand "Super Pro"...sifus..is this brand ok n the price?...or any other brand to recommend?...this brand from australia if not mistaken...then the workmanship cost rm180...

the front...i think driveshaft also 'kong'...all this 'kong' due to the darn big hole tat was at kinrara to puchong road there...sakit hati...anyway...where can find good workshop to fix this n wat brand or any recommendation like type r driveshaft etc etc...am new in this...please help asap...

any help much appreciate...thanks...

 

[M@L]

bro, Super Pro is good, expensice but good. Drive shaft abt RM390 per set siap pasang or 2nd hand give or take abt RM280/-, if u want 2nd hand go look at
kedai potongz,

thanks bro for the reply..RM390 driveshaft is original civic ej driveshaft?...is there any better one than this?...or all is the same?...thanks again...

 

[devilangel]

localy made i guess coz thats wat my mech told me, any other better then dat
wa tak tau, must ask sifuz, Hattech, Sasuke, Hikaru and so forth, me just kuci rat!

thanks bro for the reply..RM390 driveshaft is original civic ej driveshaft?...is there any better one than this?...or all is the same?...thanks again...

 

[M@L]

thanks again..so anymore of the sifus haf any suggestion or recommendation?...:regular_smile: