CRC MAF cleaner

[AE111_SEG]

Guys,
CRC MAF Cleaner can be obtained from Spare part shop near State PJ Police station. I think it is called Fook Bee I bought it from there...go check it out...The can will be displayed on the window... cant miss it.... I hope this helps....

 

[Caarzee]

hi,

i bought the crc maf cleaner from this place.

Syarikat Aik Heng motor & Engineering Supply‎
No. 8, Section 8/1E, 46050 Petaling Jaya
46050, Malaysia
03-7957-2602

if you have gps or googlemap with you, here's the coordinate
3.099724,101.640822

if you want to know where you can get one near your place, call CRC Malaysia.
http://www.crcmalaysia.com/general.htm

the marketing manager was helpful to find one near my workplace.

i still have half the can left. best if you can share it around, otherwise, the remaining half can will sit around for sometime.

thanks.

 

[InitialD]

Thanks to caarzee I found the place.

It cost RM33 a can.

 

[l2s_turbo]

Can it be used on those EVO3 MAF sensors? Where to get them in jb or sg??

 

[DanzEterna]

try ace hardware

 

[egb18c]

Ive use Mr kinetic, Quite cheap. bought it on9,
please see url below

Mr McKenic Contact Cleaner (Fast Dry) 400ML

just to share my experienced, not advertising. used it on sr20det MAF since my expensive contact cleaner bought at ace hardware finished edy.

 

[vr2turbo]

Oh! you just use normal contact cleaner to clean....

 

[hitz]

Oh! you just use normal contact cleaner to clean....

I also just use normal CRC contact cleaner to clean the AFR sensor.

 

[devil_kevin]

you all meant as per photo?

 

[bob_stuffs]

Tried ACE Hardware unable to find CRC MAF Sensor Cleaner.

Not easy to locate this haha

What is the price now?

 

[vr2turbo]

Tried ACE Hardware unable to find CRC MAF Sensor Cleaner.

Not easy to locate this haha

What is the price now?

Can call CRC and ask which dealers have them......

 

[6UE5t]

Just use contact cleaners also just as good.

 

[vr2turbo]

Just use contact cleaners also just as good.

For NA I think it is okay, but maybe not for turbo. I remember using TB cleaner for my Hyundai, and there was a warning not for turbo cars......

 

[6UE5t]

For NA I think it is okay, but maybe not for turbo. I remember using TB cleaner for my Hyundai, and there was a warning not for turbo cars......

It's the same but use contact cleaners better I think, coz contact cleaner dries up faster without residue coz it's intended for electrical cleaners, so similar like MAF cleaners. I did try both contact and carb cleaners on my Mark X and contact cleaners seems to work just a tad better.

 

[vr2turbo]

It's the same but use contact cleaners better I think, coz contact cleaner dries up faster without residue coz it's intended for electrical cleaners, so similar like MAF cleaners. I did try both contact and carb cleaners on my Mark X and contact cleaners seems to work just a tad better.

Was it easy to start after cleaning? Mine was difficult, had to crank for sometime, probably the TB cleaner too much and the plugs cannot fire.......lol

 

[6UE5t]

Was it easy to start after cleaning? Mine was difficult, had to crank for sometime, probably the TB cleaner too much and the plugs cannot fire.......lol

Mine was quite easy. I took out the MAF to clean so not spraying anything else.

 

[vr2turbo]

Mine was quite easy. I took out the MAF to clean so not spraying anything else.

Oh! Mine spray quite a lot to clean TB, then the inside of inlet manifold.......hhahahhahahha