I know this ecu is come from eterna 1.8 4G93 NA DOHC , any of u drive with
this ecu ?? how is the performance, rpm cut off limit and fuel consumption ?? Pls help .. Thanks :D
I know this ecu is come from eterna 1.8 4G93 NA DOHC , any of u drive with
this ecu ?? how is the performance, rpm cut off limit and fuel consumption ?? Pls help .. Thanks :D
hehhehe i'm using this ECU...
first time dyno it wit stock 1.5 exhaust can get 101 whp hehhehe....
comsuption not that bad with proper tuning n maintance should be ok....
rpm cut if im not mistaken is 8500....
so far the top speed i got for this engine is 188 n still can go...
good engine response, quiet engine, quite powerful engine....
if im not mistaken the fuel i got for 90 km is nearly Rm10 of petrol....
but i was driving berhemah always maintain below 100km/h n max rev at 3500-4000 rpm
but i noticed when u got heavy foot n tuning was quite high power is there but the car petrol thirsty...seems like good tuning will effect the petrol consumption...
my next experiment shud be goin to melaka from kl n speed shud b maintain at highway speed n gonna c whether this engine got better mileage....
engine is like boyzone stated above....4G93 Mitsu engine...
wiring i rojak wit my old 1.5 wira...airflow still stock when dyno i just take out the filter.
u can ask ah kit what u want to do...i record my hp only...ah kit did 17 runs bcoz at first my engine 105 hp..then ah kit did the tuning n the hp drop...
dunno he got semangat to tune back my engine dats why i got 17 runs.....
my car stock bone standard n i was quite hard to tune unless u got some engine management n will b much easier to tune up ur car eg: u wannna higher AFR can b done by playin the management..no need to mention my name.. he do recognized my fren..n he doesnt know me...
Hi guys, I'm not a Skyline owner (I'm only 18 & just passed my driving license) but I just had to post this and share it with all of you and I think it will shock some people, especially GT-R owners.
i would like some help from sum sifu's out there.. im planning to SC my B20A engine from a SE3 Accord.. i would like to know wat type of SC kit should i look 4 in the market... i really hope u guys could help me...