4g67 turbo..

  • See what others are reading now! Try Forums > Current Activity
  • Fixed New Thread missing Editor: Hi Everyone, the issue with posting a new thread or a reply that shows a missing editor has been fixed. More updates to the forums will be added on in the coming days, we apologize for the inconveniece this has caused
apa lagi bro, raya over liao.... its time for your project to kick off liao
 
aiyooo..still confused haa hahahahaa...cum..cum..let us all guide u hehehehe
 
ya laa wut u have on the floor now?wut r the things that u hav already?MONEY ogt ha? hahahahaha
 
rite now i don't have anything on the floor..just that 4g67 on my engine bay..
i'm planning to put 2jz pistons..about money,not much laa..so i have to be money wise..
hehhehe
 
hi, its safe to bore from 81.5 till 86mm
till 87mm i'm not very sure as i had not tried it and don't know anyone does.

i myself also using 4g67 block, but i only bore till 85mm to fit in vr4 piston.

actually seeing is believing
if u had seen the 4g67 block, u will have definite confident that it will be able to bore till 86mm..

cuz the cylinder wall is so thick.. it actually looks alot like a debored VR4 block.

but many things u need to buy first to build a 4G67 block.

you need:
VR4 oil pump
VR4/Evo oil squirter
VR4 flywheel.
everything else can use back evo 1/2/3 ones.

these are really the hard to find loorrr.
especially the flywheel, most are condeem flywheel. crack and unusable, i found 2 last time. but both are unusable. the seller also lari already. cannot get my money refund. haih haih.
so i resort using a new JUN forge flywheel, cost me a bomb, about RM1000 per piece. ;(

But then if u already got the stuff ready, then you can start to play 4G67 block hehe...
else, your project could hang a long long time.

the other good about about 4G67 block is, its 100% compatible wif VR4 parts or the mat salleh call DSM parts. so u can absolutely change every single part of the engine with performance parts.
cool huh~~ hehe
 
Last edited:
owndferra said:
rite now i don't have anything on the floor..just that 4g67 on my engine bay..
i'm planning to put 2jz pistons..about money,not much laa..so i have to be money wise..
hehhehe
Click to expand...

Pm or call me if intend to look for turbo parts...
want to clear my house...all are vr4/evo parts leftover...hehehe


p/s - cannot list down item in here....this is not pasar malam ar...ekeke
 
RS gang said:
Pm or call me if intend to look for turbo parts...
want to clear my house...all are vr4/evo parts leftover...hehehe


p/s - cannot list down item in here....this is not pasar malam ar...ekeke
Click to expand...

mind giving ur cntct nmber to me??
 
since that u r already using 4G67 engine, i think not much item need to find anymore..
Because u can used back 4G67 item. But if u can find a vr4 part. It better 4 u.

here is 4g67 block after rebore to 85mm.. As u can see, the wall is still thick.
http://i287.photobucket.com/albums/ll155/eci4ever/Kereta/g67.jpg
 
eci4ever said:
since that u r already using 4G67 engine, i think not much item need to find anymore..
Because u can used back 4G67 item. But if u can find a vr4 part. It better 4 u.

here is 4g67 block after rebore to 85mm.. As u can see, the wall is still thick.
http://i287.photobucket.com/albums/ll155/eci4ever/Kereta/g67.jpg
Click to expand...

4g67 block with evo3 piston...sure lazat haa...huhuhu:listen::listen:
 
haaa wut r u waiting for mann..head use back 4g67 head to rise the comp a bit.Advantage of early spool up. for the piston make up ur mind which piston u want to use. coz this is a 1 time job only to bore the block...it's a complicated thing to do if u change ur mind want to use bigger diameter piston in future..so might as well do it 1 time only. My suggestion is go get urself a forged piston la bro 1 time investment only. then no need to worry can boost 2 bar or cannot or wutsoever la.Think about this wisely. hehehe racun..racun hahahhaa
 
goo_61t said:
haaa wut r u waiting for mann..head use back 4g67 head to rise the comp a bit.Advantage of early spool up. for the piston make up ur mind which piston u want to use. coz this is a 1 time job only to bore the block...it's a complicated thing to do if u change ur mind want to use bigger diameter piston in future..so might as well do it 1 time only. My suggestion is go get urself a forged piston la bro 1 time investment only. then no need to worry can boost 2 bar or cannot or wutsoever la.Think about this wisely. hehehe racun..racun hahahhaa
Click to expand...

i don't know alot about forged pistons la bro..so mind give me some information about it such as the differences between stock pistons,power gain..etc..
 
RS gang said:
4g67 block with evo3 piston...sure lazat haa...huhuhu:listen::listen:
Click to expand...
Waaa.. u can recognize e3 piston.. Sure otai ni...
hehee... not very lazat laa.. Fairlady piston lagi lazat...:)


bro owndferra, what u waiting for.. Let's the project begin... heheee
poison... poison...
 

The Marketplace Latest

Posts refresh every 5 minutes

microtech LT10S-evo8
looking for microtech lt10s with 30psi or 45psi for evo8.any bro wan to let go pls leave me a msg.tks
Mileage for S13 and S15
Hi all,

Would like to know the full tank for S13 and S15, as well as the mileage. Normal slow and steady driving, no high boost.

Thanks.
Wanted Skyline GTR 32 or 33 front calipers
Wanted Skyline GTR 32 or 33 front calipers Brembo

Wanted Skyline GTR 32 or 33 front calipers a set or just a left side.
Email me at [email protected] if you have one lying around.
Thanks..

Recent Posts

Search

Online now

Total: 5,061 (members: 0, guests: 5,061)

Enjoying Zerotohundred?

Log-in for an ad-less experience
Top Bottom