Machine shop / custom made parts / engineering works

[AvanT]

Hi bro, where is your shop located?
Im interested to do a brake bracket + rotor redrill to pcd100 for bbk conversion. Possibly addition of spacers too.

Hi Melvin, thank U much for your inquiry.
Yes, we're able to do all the above U mentioned.
We're located in Kepong, Taman Ehsan.
However, I can only take up your job after June due to relocation & setting up new machinery.
I sincerely hope U can wait & let us assist U with this project of yours coz I'm looking forward to work on a Ford Fiesta project.

 

[Umarroy]

Mr wilson,do u got transfer gear cover for locked gearbox?

 

[Izso]

Avant, I have drawings in CAD format and want a quote on how much to make. Possible? Just a quote, no need actual item to be done.

 

[cerry87]

Where your shop location..? I want to custom bracket my honda civic

 

[AvanT]

Mr wilson,do u got transfer gear cover for locked gearbox?

Hi there, is this for your Waja + RVR turbo + evo gearbox ?

---------- Post added at 01:38 AM ---------- 6 hour anti-bump limit - Previous post was at 01:36 AM ----------

Avant, I have drawings in CAD format and want a quote on how much to make. Possible? Just a quote, no need actual item to be done.

Yes bro, email me the drawing at [email protected]

Apologize for the late reply, was away for a while & have relocated my shop.
Qty U need for the part to quote?

---------- Post added at 01:41 AM ---------- 6 hour anti-bump limit - Previous post was at 01:38 AM ----------

Where your shop location..? I want to custom bracket my honda civic

Hi Cerry, I'm located in Sungai Buloh.
U may contact me @ 012-283-3635.

 

[Izso]

aisay, I already had the part made last 2 months. Nevermind, next time I'll come find you for other parts I wanna do

 

[Ryuuken]

Bro,do you do custom intake manifold and 4 Throttle for 3SGTE? And also,could you do an intake pipe with for 2 Open Pod Air Filter?

 

[AvanT]

Bro,do you do custom intake manifold and 4 Throttle for 3SGTE? And also,could you do an intake pipe with for 2 Open Pod Air Filter?

Hi Ryuuken,
We have done custom intake for Mitsubishi 4Gs, 6-throttle for Skyline GTR, but have not on a 3SGTE. Question...can U provide the intake manifold gasket & individual throttle bodies? I can help U with the fabrication, but will need U to gather all necessary parts for us to start with.

 

[modesto007]

hi bro,

will be you able to do this as per photo in 02 and 04 ?
i need that hollow cylinder with thread then top mount screw and bottom threaded screw for it. this is for front and rear.
spring i can get it elsewhere.

thanks bro,

 

[AvanT]

Hi bro,
Thank U for your inquiry & apology for the late reply.
Sorry to inform U that we are unable take up your job because we operates CNC milling machine, don't have a lathe machine for this kind of job.. =(

hi bro,

will be you able to do this as per photo in 02 and 04 ?
i need that hollow cylinder with thread then top mount screw and bottom threaded screw for it. this is for front and rear.
spring i can get it elsewhere.

thanks bro,

 

[sanekit]

hello,
do you do disc rotor conversion? i have 1 set front disc rotor pcd114 need to convert to pcd100. thanks.

 

[AvanT]

Yea sanekit...

Are U planning to convert 5-holes or 4-holes, 114.3 PCD to 100 PCD? This is a pic of a PCD conversion we did few weeks ago....Nissan R32 5x114.3 PCD -> 4x100 PCD

http://www.zerotohundred.com/newforums/attachment.php?attachmentid=553337

 

[AvanT]

Fitting a SARD blow-off valve on a stock STI intercooler...

 

[Izso]

Avant - I've been quite unsuccessful in sourcing the calipers for my car. Do you guys do sourcing as well or just the custom jobs?

 

[AvanT]

Sorry bro Izso, afraid U will need to source for the parts U need =)

 

[marv3]

Hi AvanT. This seems to be quite an old thread. Just wondering if you are still in operation?

 

[AvanT]

Hi AvanT. This seems to be quite an old thread. Just wondering if you are still in operation?

Hi Marv3, anything we can do for U?
U can Whatapps me @ 012-283-3635

 

[AvanT]

Custom design & slotting a set of 342mm disc rotors...

before...

after...

Pls contact us for details & pricing...