Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="stroker_kit" data-source="post: 230178" data-attributes="member: 1595">although fish tank valve are also using the bleed method like the rest of the branded manual BC, the boost generated are totally different(but no doubt it can still increased ur boost level laaa).... using cheap fish tank valves will produce boost creep, it takes a longer time to get max boost a.k.a lag..... however, using branded BC which normally uses ball bearing pressure release valve will ensure that max boost is produced at minimum time....cos only when the required boost has been reached, only then the pressure is released to the actuator to open the wastegate....not like using fish tank valves ...it will open the wastegate slightly right from the very start at 0bar, thus producing max boost slower....this also happen to standard actuators on a standard factory boost setting.....so, u might want to think again.... rm150 for a pressure release manual boost controller is not bad for a budget maaa....provided that this Hallman's BC really is a pressure release type of manual BC... :)as for me, im using Turbosmart manual BC which are really cool compared to my old fish tank valve...it can even lower down the boost level below the standard spec.... and the max boost produced are alot faster with minimum boost spike..... brand new rm300, but i bought 2nd hand abit cheaper laaa...</blockquote>

Verification

The Marketplace Latest

original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body
Nissan Almera Tomei body kit
- Started by jeff6126
- Exterior and Body
original rare Black Racing Pro N1 16x6.5jj offset...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

Reliable Workshop for Mitsu Evo

Hello Evo Owners,

Would like to ask Evo owners around KL/PJ/Puchong area, where do u guys service your Evos? Any reliable workshop that have expertise in servicing Evo?

VIDEO: Bentley Power on Ice (2012) - Finland