Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="seanlee" data-source="post: 2332432" data-attributes="member: 3607">anyway..the 1st thing is to solve the piping issue.....piping shouldn`t connect by sambung part by part.....this is incorrect way.....you need to change the whole piece of thing from now mean one whole piece from front cat to the end muffler...actually you shuoldn`t touch your piping..is good enuff got he power..and yet is Mendrel bent is quite exspensive piping if you wan to buy it again coz is not a normally piping that normal wira use....so 1st you need to change is your piping to new set of piping cost about Rm250 in the market but sorry is not mendrel bend piping ...if yu wan to use back mendrel bend should be about 500-800yes i did lower my car.....if you are Wira SE you should got for improve brand if you dun wan adjustable.....if you wan to use adjustable...go and get Satria GTI spec adjustable whereby the font anti roll bar mount are link with absorber are same like us...coz the problem wirase is the front anti roll bar are different from other wira</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body
Nissan Almera Tomei body kit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

TD05 conversion - need help for fan size

Hey guys.

I'm collecting parts for the TD05 conversion. I want to change both the 14 inch fans. How thin must the new fans be to clear the turbo? Any aftermarket thin radiator fan can use?

For the guys in NZ, any...

Merry Xmas and Happy New Year!

To all skyliners,

Merry Xmas and Happy New Year! :driver: