Who drives a EJ0/9 converted Manual?

[^Dreamerz^]

wish to know who converted their civic EJ0/9 to manual transmission...
i did, n facing some problem..
hope experience people can gif some tips :_:
thanks

 

[Hikaru]

what problem is that?

 

[^Dreamerz^]

very bad problem...
after my conversion, my car idling is going nuts... but there isn't anything to be done re-tune back to normal.. I call this the "gila-gila rpm problem"

symptom:

• when i start my car in the morning [or first time in a day], the idling sometimes settle in a too low rpm until the air-cond compressor goes on off on off n so on! engine will die too~
• after a while of warming up, during driving, my car engine will die when the clutch is stepped.
• car jerks as i minimize the usage of clutch, although using proper gear at proper speed level.. for eg. at 1st gear, it feels like using 3-4 gear power to generate speed, vice versa [i hope u all get wat i mean]
• obviously, this conclude clutch balancing when driving to be superbly difficult..

solution tried by my mech: [3days 3night at workshop]

• service -> change throttle body
• change ECU
• test drive wif tuning machine [shows normal]
• adjusting the valve to high or low [neither of it helps]
• inspect wiring system that was modify, as last time my fren EJ9 convert using this gearbox n wif the same mod done, he face no problem
• LASTEST solution: modification done on wiring to differ from basic operating system [not so sure, but mainly i guess is the air-cond sys running differently, not affecting rpm to much] STILL DOESN'T HELP!

my mech's final solution [worst come to worst]: not done yet

• change to 98' wiring system :emoticon_U:
• B16A halfcut?! not way, no budget for conversion yet!

one of my fren's review:
Clutch catching not proper at every level, it catches n later it doesn't... also prove the difficulty for balancing the clutch..


anyone out there wif such experience or have any idea that u might wanna share wif me?? any idea wat can bring such effect to my engine?
maybe gif me a list of wat should i look for now, bcuz i'm totally cracking head trying to think wats the problem :emoticon_U:
can it be the installation of the gearbox?
can it be wiring?
wat else, if u can think of pls guide me through!!
thankssssssssssss alooottt!!!

 

[hattech-v]

wah... very details explaination on ur problem... hope someone here can oso give details answer to help u...

 

[^Dreamerz^]

wat to do... very annoying to drive the car now..
with the mod done at latest solution by my mech, my engine will die off whenever engine is cold if i don't throttle, for like 5 minutes + i have to hold the throttle..
so sick!

 

[patrickchong]

full overhaul. lol..... depends on the detail, from my opinion, more than 50% is from tat gear box, try check tat, or drive shaft, mayb some bearing is spoiled?