Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="artnet" data-source="post: 405640" data-attributes="member: 1742">but one thing for sure... get the most thick hard box...i already gain one experience by paying RM250 for a box.the maker said, use my box.. garantee u no regret.. if notsastisfy i redo and redo again until u sastisfy... but now wht..don even wanna come and listen to his piece of shit. i ask himto come and listen his box... he said i dunno how to tune. KNN!then i said u come and tune la... keep saying busy busy.. and whenmet another fren of mine, he told him that he will never do things for me. wht the f*ck.he is using very thin particle wood to do the box. less than 1cm.built 1.25cuft and 1" ported hole and 6"length. right behind woofer.so i wire it up and blast it.. found that the sound is very very blur..check it.. and found that the whole box is vibrating, creating lots ofbass.. really a lot of bass.. until it sound very messy.he really did a very good sub box for his 8" with all the spec above.but the point is... his 8" is 150watts rms and he only provide it less thanthat. and the box design of him is long type and the surfaces are small.so the box is consider much more stiff compared to my square box.hence it dones't vibrate that much.conclusion is that, his design can only use for low power sub and smallbox. he doens't want to come to me.. and i'm lazy to tell him... normally,if ppl telling that urs are not good.. u ask him to share la.. explain and see.if his explanation is riduculous u can ignore him. but he doesn't care atall... keep on with his own idea. saying he got keep in touch with the BOSEengineer. if he tells his design to BOSE, BOSE need to pay him the money.ok.. stop here.. continue on my blood pressure keep getting higher.oh ya, to prove that his box is not useable. i've changed the box withoutany change in my tuning. and it sound normal now. i've try to adjust thisand that while using his box... no cure at all. if anyone doesn't believe..i ship the box to u for free.</blockquote>

Verification

The Marketplace Latest

original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

need opinion about installing piggyback or standalone

need opinion about installing piggyback or standalone..

where i can learn to install it? or there`s any class can learn it?

thank you :wavey:

105 years of the Rotary Engine

http://www.wired.com/images/article/full/2007/08/081307_dayintech_580x.jpg

The picture above is the first inventor rotary engine, now kept in Deutsches Museum in Bonn, Germany. This model is coded as DKM54.

1902...

Wiring for door lock

Please help me wiring for door lock.If press the brake,door lock.
My car WIRA AUTO and the alarm system is original wira alarm.Please help meee...:confused_smile: