Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="Rleo6965" data-source="post: 1064543650" data-attributes="member: 135626">No. It's not the same. The schematic shows only bunch of big electrolytic filter capacitor. The total capacitance of big capacitors was to store charge voltage from Battery and Alternator. This will only temporary flatten the battery voltage. In case a big short draw of high current of car electrical devices. But if there's a continuous high current. VS will not prevent voltage drop. It's act only as big electrical noise filter. The ceramic capacitors will only filter out high frequency spike noise from on off switch contact of switches and relays.I think its impossible to use IC voltage regulator to car electrical system. You can not find an IC Voltage Regulator with 80 Ampere capacity. And also voltage Regulator need a higher Input Voltage than its DC output regulated voltage. Let's say we need +12V for our car. We need to find +18V Battery and 18 volt Alternator. That's the reason IC Voltage Regulator was not applicable to Car Electrical System.IC Voltage Regulator was only applicable inside the Alternator.If you want a stable car electrical system. Use Multi Point Grounding Kit. Multi Point Ground Kit connection was like and Octopus wire connection and use short wires and all ground point was connected to - Battery Terminal.Avoid Daisy Chain Grounding Kit. Daisy Chain was ground wire connected in series and becomes long grounding wire. Long wire will have higher voltage drop.</blockquote>

Verification

The Marketplace Latest

original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

RB20 Racing Clutch+Nismo Kit

RB20 Exedy Single Clutch+Nismo (pull type)
-Exedy Clutch Cover
-Nismo Racing Plate 80-90%
-Nismo Flywheel

all for RM1350

012-2176627 location Pandan Indah/Cheras.

View attachment 625427...

Video : Alien engine at Sepang Drag Battle 3

Hear the exhaust sound

13B and 20B engine. Long live for rotary............

( Vazmaz vs R-enginering )

Sagatenuk vs Alien engine :regular_smile:

RE rebuilds - the inside story!

Have you ever wondered what your rotary engine looks like inside?

Here are some photos of the rebuilds we have completed to date. You'll notice that it is very important that all component parts are cleaned to a...