Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="speed2horizon" data-source="post: 1063371358" data-attributes="member: 30831">-Not precisely customized intake manifold. It's rather a connection from ur SC outlet to inlet intake manifold. -to me, I'll recommend a management that is able to control external injector. Sang uses injector controller.-external injectors. But I chosen to second the external injectors is dduento it's simplicity in tuning and it does not disturb the base map of ur ecu.-suitable pulley tensioner set with customized bracket for the SC n pulleys involved n throttlebody relocation.-suitable length belt.- activation device. Depends on how u wanna activate the magnetic clutch. Sang uses an ON/OFF switch. I'd prefer something like shiftlight controller/RSM to trigger it at a preset rpm. So, when ur engine reaches a preset activation rpm, it'll activate and pull. Something like a VTEC, but pulls much stronger.- Intercooler, it's up to the pressure u're forcing in. As reference, Sang didn't use an intercooler.- Now, it's time to think of the SC oil. Do u want to join them with the engine oil, or u want to have an external reservoir??? There are pro n cons on either way. I'd prefer to run it with external reservoir n oil cooler. Just incase if it leaks, it'll not disturb the engine lubrication supply. But u need to have 2 maintainence schedule which is something difficult for undiscipline ppl like me. But, it has less thing to du during the installation.- on top of all mentioned, u NEED to get an enthusiast mechanic that is willing to seat down and put himself into ur shoe, understanding ur problem n find the solution.- final part, after instalation... U need to decide on which tuner to go for.</blockquote>

Verification

The Marketplace Latest

original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

23 Jan 2010 - Open Track Days 1300 - 1600 PM

Sharing photo.. and discussion..

what a hot day on saturday.. Badly to see ek9 with flip over with the car and Putra miss T10 i think so, burning up with the fire something wrong with the ECU problems?

Need Help, After Installed FPR Than BOV Not Working!!

Hi guys...

Need advise.

previously i run without FPR, the bov well working I plug hose with the vaccum from intake manifold.

Once I installed the FPR & also plug the hose using the Vaccum from intake manifold...

WTS:5 pcs Defi Meter (white)

Boost+Oil temp+Water temp+Exhaust temp+Oil press+Control unit
White Colour, Price : RM 1800 nego.. 1 temp without sensor..
interested plz call or sms : 019 6965563
012 2286698