Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="shiroitenshi" data-source="post: 1063361980" data-attributes="member: 27518"><p>seriously? do let me know if you do it, i'm curious how you're going to run the pulley on a gen 2. Just a picture will do. At minimum, an ecu remap would do, if it's minor, but 20psi is not minor, depending on compression, might need lower comp pistons, and sure as heck bigger injector. If 7-8 psi, maybe can get away with stock injectors with higher fuel pres, depending since some cars come with bigger injectors that they actually need, but 20psi? This is not small cc kancil engine we're talking about. Sorry, but looks like you might have to save up some more or go lower with your hp goals.</p><p></p><p>In superchargers, bigger pulley = lower boost. Smaller pulley higher boost, size percentage increase roughly should decrease pressure respectively, but it's not 100% since there is also the peak efficiency factor to consider, since like anything that pushes air or liquid, there is always a point of peak efficiency and points of diminishing returns. Hope your mod works out. Would be nice to see some different methods of modding for power.</p></blockquote><p></p>

Verification

The Marketplace Latest

original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Japanese ATR mod

Check it out.

http://www.ne.jp/asahi/ham/jh1hhc/CAR/Remode.htm

HID Bulk

HID Bulb

Hi Guys..
How to make our ori HID bulb evolution more brighter...

Pls advice :banghead:

:banghead:

fd rolling chassis

anyone know where got sell? prefer uncut one.

Recent Posts

Search

Online now

Total: 2,546 (members: 0, guests: 2,546)

Enjoying Zerotohundred?

Log-in for an ad-less experience