Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="gerard" data-source="post: 260415" data-attributes="member: 7656">Hi guys,With regards to the supercharger bolt on kits and advantages of superchargers, you could refer to a post which I've submitted in the ZTH under, car modifications section...I do agree to a certain degree that you can't boost high with bolt on kits, be it turbo applications or supercharged applications BUT my golden rule of thumb is if you get the fuel curve, fuel mapping & timing right with no detonation you could run higher boost which I've proven with my GTI 1.8 (4G93P) with a bolt on kit and at stage one with stock clutch, pistons, no metal gasket, or forged pistons, basically NA engine and gearbox with a boost of 0.7 bar. Just with the help of fuel mapping, extractor, full exhaust system and after market air filters. It registered 162.3hp on wheel and max torque at 200nm @ 2800rpm....Been running stage one with no problems for 3 years now and even did a long trip to PHUKET (2400km) with the GTI club last year.......2003As for our stage 2 kit, still using the same stuffs, maybe mod a bit here and there I'm running 1bar of boost now (1 year)...Sorry guys, can't reveal any further information or details on stage two yet as it is still not ready to hit the market yet..As for your question on Gen2, Turbo Sang did discuss with me on the possiblities to develope a supercharger bolt-on kit for the Gen2 model, unfortunately, to me it is still a fresh new engine (not proven yet, unlike mitsubishi) and we would require a bit of time to understand its fuelling system, electrical (EMS), gearbox system before we begin R & D works. Oh! . the other problem is that we do not have a test car yet to do and R & D work. Hahaha :D Do keep me posted, should you manage to get an installer to install a supercharger unit in your Gen2....Just beware, you must get a competent installer else your nightmare has just begun...Do contact us once in a while to check on our progress. ..who knows, a Gen2 may be in the making. :rolleyes: I could be contacted at 012-3073928, 012-3872153Many fine regards and happy new year :D Gerard</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body
Nissan Almera Tomei body kit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

`Wajib tukar dalam 14 hari'

Hello guys,

Its been awhile, no news or new thread from the MLOC owner. Seem new clan arise.
Probably few left still driving an EVO from year 2008 till now. Some upgraded to supercars.

In newspaper `Wajib tukar...

Pitwork Timing Belt

I have a Pitwork Timing Belt suitable for the below engines:-

RB20DE、RB20DET、RB25DE、RB25DET

It's brand new and if you are interested, kindly PM me with your offer price.

View attachment 620473

JPM Integra Cup Round 9 - Sepang Circuit Malaysia