Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="Izso" data-source="post: 1064264469" data-attributes="member: 2429">The radiator doesn't have gunk or whatever, it's clean. I flush it whenever I change it and I take out the thermostat too to flush out whatever is in the block. The shops just use a high pressure water gun to flush the thing, I don't do that mainly because I don't want to break anything. If the amount of water flowing out is as much as the water flowing in, then I'm fine. 1. No. As mentioned only serviced once and I keep everything clean2. No. See #1.3. Possible but not obvious since side by side with another Myvi the fan appears to be running equally fast.---------- Post added at 08:17 AM ---------- 6 hour anti-bump limit - Previous post was at 08:15 AM ----------Sigh. This was what I was hoping to avoid. It's a b*tch to remove the water pump in a Myvi. I'll try the radiator cap suggestion first then swap out the water pump as a last resort. My temp is constant throughout the day and these last few days it's been cold and wet so the temp has been been fantastic too. The problem only occurs on hot days and when the car is close to idle and/or moving very slowly.</blockquote>

Verification

The Marketplace Latest

original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

wta-about the wheel

hello bro...is it 18x10.50 offset +22 can fit to lancer evo 8?any modification to fit this size of wheel?thanks for ur reply...

Problem with my evo 4 engine

Hey guyz, i need u guyz help, im having a problem with my car
here's the specs first

gen2 with evo4 engine
38mm wastegate
sqv blow off
e-manage
and some minor mods
with 3inch straight exhaust flow

before this the...

Nice roads in kl

Hi everyone, just coming back from aussie few weeks ago, i realized the trend of cruising here are mainly streets not so much on twisties. Where in aussie, twisties are more popular due to cops and nicer winding...