Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="jzafddc5" data-source="post: 4503238" data-attributes="member: 94357">Rotary engines (with good compression) are rev happy engines. To maintain its rev say 5krpm at 5th gear would bring u to approx 200kph+ (depends on final drive ratio as well lah) is not a problem...as the engine can take up to 8k rpm without sweat.The essential part is the cooling system though.. as rotary will loose compression tremendously if u over heat it, drive it hard when its not warmed up properly etc. There are threads about this done by the rx7 sifus in the rotary forum..which is very very beneficial for a new rx7 owner.Rotary engines are great and very durable if maintained properly...and is an engine that u MUST take it to redline every now and then..which is the best part!!</blockquote>

Verification

The Marketplace Latest

original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body
Nissan Almera Tomei body kit
- Started by jeff6126
- Exterior and Body
original rare Black Racing Pro N1 16x6.5jj offset...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

findin lancer convert to evo4-6 car...prefer owner deal

hi guys...im a fan off evo...but u know evo as out off many ones budget so im findin any owner which gonna sell off his lancer convert toevo4-6 ...price photo everything is well come....hope anyone from this forum...

Finals | Miss Hypertune 05