Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="Ray" data-source="post: 485870" data-attributes="member: 1801">Anyone got this cable plug for my 4age small port. please PM me... my got low budget one! don have money to buy new TRD plug cable cost at RM400! :( Alvin! nice car you have!! heheheThis is some of my Engine Info... Third Generation 4AGE (89.5-91.6)The next generation engines were introduced in May 1989 and remained in production until June 1991. These engines effectively retained the heavier duty block but added a new head with smaller intake ports, hence the TVIS was discontinued. Some engines have silver cam covers with red lettering only (and so are called red tops), while others continued with black and red lettering. The easiest way to identify these engines is by the ribbing on the top surface of the intake manifold (earlier models have smooth tops) and an external oil drain from the head to the sump, located on the inlet side behind #4 inlet port. The sump is slightly different to earlier models.These engines all have oil cooled pistons and the ignition leads run underneath a cover between the cam covers. Power is increased to 100 kW and all engines are MAP sensored. I believe these engines all feature a knock sensor, located near the top of the block on the inlet side between #2 and #3 cylinders. This is the final naturally aspirated 16 valve variant produced.The 4AGZE has the same additions and utilises the twin coil distributor less ignition system, as it was only available in FWD AE 92 Levins and Truenos. Power increased to 120 kW and the supercharger has a smaller diameter pulley compared to the earlier version.</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body
Nissan Almera Tomei body kit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Volkswagen Amarok by Rheinmetall Defence is Ready for World-Wide Deployment!

Rheinmetall-Amarok-M-milit%C3%A4r-Light-Multi-Purpose-Vehicle-7-600x395.jpg

Willys brought us the 1940 Jeep in response to a US Army requirement...

Ariel Atom gets a rework by German tuner Wimmer

https://www.zerotohundred.com/wp-content/uploads/2010/12/atom1-600x399.jpg

Colin Chapman had it right by cutting weight and the Ariel Atom is one of the best possible examples of that in these times.

Weighing in at...

Which intercooler...

Just out of curiosity, which intercooler other than the stock gsr intercooler can fit in the GTi WITHOUT cutting or modifying the bumper?

tintin