power fc

[lan evo]

lets say i got a boost controller and i use power fc.i use the external boost controller instead the built in from the power fc.whats the pros and cons?

 

[phat7]

none. just make sure you disengage the original controller as your standalone BC will not work properly. Also the power fc can actually only increase boost to a certain degree and for radical increases in boost you will need to use the boost controller solenoid that will plug into your power fc.

 

[lan evo]

none. just make sure you disengage the original controller as your standalone BC will not work properly. Also the power fc can actually only increase boost to a certain degree and for radical increases in boost you will need to use the boost controller solenoid that will plug into your power fc.

thats mean it will be ok if i stick back to my boost controller without buying the power fc boost solenoid?

 

[phat7]

absolutely. The pfc boost solenoid is the same as the AVCR unit(correct me if i'm wrong) Setting though might be tricky as your pfc boost settings should correspond to standalone boost controller or else you get fuel cut.

 

[lan evo]

thanks for your reply.the solenoid was same with the avcr one.but if buy only the solenoid it will cost over 1k,better buy a used avcr:D

 

[stroker_kit]

AVCR got FCD function???

 

[cmng]

err i remember solenoid is same
but you need the connector to ECU.. and wiring is terbalik.

 

[phat7]

for example when hooking up a boost controller use a "T" and connect factory and aftermarket hoses to wastegate controller.