pls list down the important tools needed to disect a 13b-rew....

[jeffblazed]

pls list down the important tools which are needed to over haul a 13b.....any special tools.....

 

[coolblue]

1) 54mm 1/2 inch socket ,

2) front pulley hub that need a 19mm socket with a strong impact gun ,

 

[jeffblazed]

1) 54mm 1/2 inch socket ,

2) front pulley hub that need a 19mm socket with a strong impact gun ,

thankyou......

 

[SomeGuy_sg]

1) 54mm 1/2 inch socket ,

2) front pulley hub that need a 19mm socket with a strong impact gun

3) Engine stand with adapter for the rotary engine

4) Shoplift to get it in and out of the car with out scratching it

5) Most important(i think, anyways :D ) - Factory Service Manual with some common sense

 

[jeffblazed]

1) 54mm 1/2 inch socket ,

2) front pulley hub that need a 19mm socket with a strong impact gun

3) Engine stand with adapter for the rotary engine

4) Shoplift to get it in and out of the car with out scratching it

5) Most important(i think, anyways :D ) - Factory Service Manual with some common sense

thank you sir........

 

[13btt]

You will also need -

1. Flywheel stopper to stop the flywheel from moving when you try to loosen the front pulley hub bolt which is 19mm, as very often the impact wrench will not loosen this bolt, especially if the engine is oem assembled from Mazda. Even more important is the stopper for proper reassembly with correct freeplay & torque of the tension bolts etc.

PLUS many others for a smooth execution of the "engine teardown" process