Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="Enthusiast" data-source="post: 1788467" data-attributes="member: 18629">Ok guys been missing some time....anyways here are some updates on setup and the Dyno results that i promised......Changes on setup : b18c gsr block, b16a head, b16a IM, B16a TB bored to 66mm, mugen chip, Type-r 4-2-1, Racecraft cf filter, 2.5 inch jaafar custom piping, 5zigen fireball muffler, b20 injector, pr3 cam, p30 piston, engine n flywheel lightened, exedy semi race, p72 gearbox w lsd, safc2....running on 250 psi compression prolly due to the p30 pistons and head skimming and ligthening by previous owner....After some tuning on the afc2, manage to get 166 whp, 168nm torque.....I feel like there are much much more hp that can be squeezed out of the engine...Issues :1) The compression if converted i think will be approx 12.xx ratio.....is this ratio enough to maximise the power of jun/toda/crower cams? or shud i juz plonk in ctr cams?2) My a/f map leans out all of a sudden to ridiculous figures at around 2 - 3k rpm.....tuner suggested something is wrong with the mugen chip.......and tuner claim engine was still running abit lean due to safc2's limit of adding fuel at higher rpms....again due to the limitations of the original mugen mapping.....the afc can only add more fuel till a certain point before the signal overloads and check light comes on.......can chips be faulty having this kind of problems? any solutions/suggestions from sifus?btw i tuned it in GT auto.3) i aim to get 180 whp or above.....any suggestions? i feel like taking the head out....p/p head and Im......and plonk in aftermarket or ctr cams.......ths should yield same results as a b16b head + b16b IM imo......no point spending so much extra for the type-r items i guess......thats abt it......sorry for the long post.......but hope there'll be more of this kind of posts, like in jdmuniverse and honda-tech.com.........any other member willing to post up their specs and dyno results?Some pics of my ride...http://img528.imageshack.us/img528/1940/image707ye0.jpghttp://img528.imageshack.us/img528/3117/image709kq2.jpghttp://img528.imageshack.us/img528/9130/image710py8.jpghttp://img528.imageshack.us/img528/6395/image683cc3.jpg</blockquote>

Verification

The Marketplace Latest

original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Which exhaust sounds the best?

Guys I have trouble choosing exhausts. Currently using cheap Wai Heng replica, with 2" piping.

Thing is, I'm going over to KL soon and in the meantime I will want to get a better exhaust.

And also, my conversion to...

Nissan Skyline Chassis Code

Nissan Skyline R32

E-BNR32

GT-R -February 1989
GT-R N1 -July 1991
GT-R V Spec -February 1993
GT-R V SPec II -February 1994

...

where can repair dent rim.....

can anybody help me,,,tell me wer is the place that can repair my dent rim???? not bakar one n with economic price....tell me please....help help mee.:cry_smile: