Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="MellowYellow" data-source="post: 328060" data-attributes="member: 8062">Other information from the MR2OC site.- MAP sensor instead of AFM - Bosch D-Jetronic (Gen III) vs. L-Jetronic (relatively primitive) engine management - CT20b turbo replaces CT26- Boost raised from 10psi to 13psi- Fuel cut raised from 12 psi to 18 psi- Different ECU- 4 wire O2 sensor- Shim under bucket valve shims- slightly more aggressive cams- Revised internals (pistons, con-rods etc.) - Revised cylinder head cooling passages/water jackets- Revised intake manifold (8 'independent long ports' reduced to 4)- intake manifold inlet air temperature sensor added. i.e. after turbo and intercooler. - Revised gearbox with close ratio gearing- lower compression ratio - stainless steel head gasket - factory 540cc injectors replace 430cc injectors- revised fuel rail with bigger bore and relocated pressure regulator- TVIS eliminated - EGR eliminated - LSD in 80% of them - throttle body increased from 55mm to 60mm - inlet valve lift increased from 8.2 to 8.7 - intake manifold inlet air temperature sensor added - Less restrictive exhaust elbow - Aluminum oil pan - more rigid alloy sump and additional oil baffles- Factory Catch can - Better Oil Cooler and relocated oil filter (bottom) - 4 Channel ABS coupled with Traction Control available - No. 1 compression ring described as 'stainless steel' instead of just 'steel'. Oil ring is described as 'stainless steel' instead of 'a combination of steel and stainless steel'. - The fuel pressure raised from 36 PSI (2.55 bar) to 41 PSI (2.9bar). Originally posted by David VI don't think the info is 100% accurate.</blockquote>

Verification

The Marketplace Latest

Mitsubishi lancer Evo x front bumper
- Started by jeff6126
- Exterior and Body
Honda jazz fit gk flrs body kit
- Started by jeff6126
- Exterior and Body
Proton S70 body kit
- Started by jeff6126
- Exterior and Body
Proton saga BLM body kit
- Started by jeff6126
- Exterior and Body
Perodua bezza ~accident repair
- Started by jeff6126
- Exterior and Body
Mercedes Benz W205 C-class GT grille
- Started by jeff6126
- Exterior and Body
BMW E90 ~brake caliper spray ~rim spray
- Started by jeff6126
- Exterior and Body
Honda city gm6 FL front bumper
- Started by jeff6126
- Exterior and Body
original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

Rays Wheel nut

Item(s): Rays Aluminium Nut (long)

Package includes: 20 pc with lock

Price: 350

Warranty: NO

Dealing method: COD

Location of seller: KEpong

Contact method/details: 012 2083222

Age of item: NEW

Spec...

wtb: r34 gtt adjustable suspension....pls help..

looking for gtt adjustable suspension
either tein or hks
if anyone got or wanted to sell pls give me a call 0124967900 thank you

FC Convserion to FD FRONT..

Hi guys .. wana hear RE member opinion...FC Front converstion to FD wht will it look likes , n does the cost will much more high..i heard 1 of NZ fren,He mod his FC to FD front conversion only .. Rear Wide Body...