Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="xtremeleo" data-source="post: 4496513" data-attributes="member: 18941">u r most welcome siragain, stability isnt governed by resistance sir. by the tests dat weve done, the std / cap ayam (to a certain degree, but workable) cables are good enough for a highly modified engines. please prove my tests are wrong before u comment further, tq sir.y do you need to know all these paramaters anyway? a 7hp loss is a 7hp loss, comparison was done on the same dyno, i dont understand ur predicament in dis matter sir. seems like u are trying to create a useless issue, what can u extract from knowing the dynamometer freq? why do u need to measure the flame propagation? just to see its characteristics? for what? a power loss is a power loss, it doesnt matter how. i will avoid things dat arent worth to spend on, and losing power when uve spend a hefty amount isnt worth it. iam stating the obvious here, and u r telling me to put down the dynamometer's resolution? there wasnt much of ignition timing difference sir, but we did made adjustmenti dont understand dis, experiments do have their purpose but not the be adhered but to take as a reference, dats all. results in real life / scenario is much more applicable sir, period.correct, dats y all petrol engines ignition timing advances when the revv climbs, its very obvious sir. flame duration in degree? i dont understand on dat part, i dont remember saying the bolded phrase sir. i believe flame propagation is determined in the electrode design and the combustion chamber design as a whole (see GDi pistons design), not the spark intensity and certainly not the cable resistance. do u even know whats the resistance value of a typical cap ayam cable tak? check dat out and please confirm there is a substantial voltage drop across the worse cable u cud find. tq sir---------- Post added at 04:53 PM ---------- 6 hour anti-bump limit - Previous post was at 04:50 PM ----------i also pening dah, lol. dats what iam trying to tell him, dont make me pening with all this jargons, me orang tua sudeh..</blockquote>

Verification

The Marketplace Latest

original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Random Shot: Mansory Panamera at the Pavillion

'(00): The Mansory Panamera that had recently landed in KL now roams freely and terrorizes the eyes of onlookers with...

wts:VARIS C/F HOOD N MINES ECU

Hi guys,
some evo 7 used items 4 sale..
1. VARIS C/F HOOD (replica) RM 1400
2. MINES ECU rev cut 8000rpm, no speed cut. RM 1500
3. GIALLA FRONT BUMPER (replica)RM 700
4. EVO 9 REAR BUMPER SOLD
ALL PRICES...

Looking For Mazda Capella Rx2

i`m lookng for mazda capella rx2 , anyone have ? wanna sell ??~