Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="GSR5559" data-source="post: 935228" data-attributes="member: 64"><p>i got this complain once. im located in kl but the complain was made in perak. got to travel all the way back to perak to settle things up, cant renew roadtax. complain was made becus of reckless driving. at last din pay anythin, jus tok to the officer and bullshit abit, done. btw as for inspection, it is better for u to make it all original, u dun need to find any bracket to fit in proton hood, oni need to adjust the position, still can use back ur current bracket, the difference is mivec hood the bracket is lower, for proton hood, bracket is higher. dats all. and yes if ur running on 4wd, confirm fail. btw i dun think ur running with 4wd rite, u stated 4wd fuel tank only, so i dun think it will cause any trouble. exhaust too big, if im not mistaken it is ok, as long it is not noisy den shud be fine. lowered? depending which inspection centre u go to, sum of the barrier height is different. cus to test the height u need to drive in and pass this one bump thingy, my fren told me about it, got some place the bump lower one, some is higher. but to be in safe side, ur car better to be 1 coke can and above height. tinted? hopefully is not VIPs black. different colour of hood i dun think it will be a big problem, tell them dat ur hood rusty, or gif some excuses which is logic saying u jus replace them and got no money to paint it yet. as for the plate number, i dun think it will be a big problem oso, as long the fonts are legal, not those shiny type or engrave type or even those sticker type. each letter spaces must be not too close to each other. u know msian enforcers, if they got nuthin to catch they will find sumthin else to do one. so jus becareful before goin in inspection. and i think they will attack those cars which look more like for racing purposes. good luck.</p></blockquote><p></p>

Verification

The Marketplace Latest

original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body
Nissan Almera Tomei body kit
- Started by jeff6126
- Exterior and Body
original rare Black Racing Pro N1 16x6.5jj offset...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

Clutch change: opinions?

Hi guys, I need to change my clutch. Thinking of getting the ACT HDSS for street/daily use car.
Don't really want to spend too much money on high end ones (e.g. ogura)
Any opinions or experience with this or any...

Anyone Selling their bnr34?

Hi guys,

I am looking to buy a bnr34 .
Is anybody selling their ride or knows of anyone who is interested to sell?

Budget around 2xxk? looking for a good conditioned one with minor mods.. I dont mind single turbo...

DIY Gear Shifting Light

anyway i can diy or buy the shifting light? the shifting must be small and LED>..saw 1 thread in here b4 but gone i think...