Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="dawg" data-source="post: 1063996293" data-attributes="member: 839">Hey guys, sorry for late replies. Seldom log in to check.Will be collecting car over the weekend., did a full service and many wear and tear parts to replace (what to expect from 9 yr old car lol). I logged the air temp with new intercooler during afternoon around 41deg. However this was without hard driving and boosting.This weekend will hook up the info meter again to test air temp during high boosts. However no plans to send the car for dyno anytime soon, as long as the road tune and wideband shows engine is sufficiently fueled boosting 24 psi (tapers down to 19-20 psi) with no knock/pinging then I'm cool with it.On the cosmetics point of view, the intercooler is huge. It covers the voltex front bumper bodykit perfectly. It uses back the stock ct9a piping so no mods required on brackets and they provided all the silicon hoses and clamps and brackets to mount on the front metal beams. A stock bumper will be no problem clearing the intercooler even tho the size is significantly bigger.</blockquote>

Verification

The Marketplace Latest

original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

BC280 + Jun Valve Spring + OEM Retainers setup. Any issues?

Hi all sifu,

i'm planning to put the the above setup to my Evo3. Any issues on the combination? Only worry about the OEM retainers. Need feedback

Carbon Fibre fabric

So... does anyone know where to buy carbon fibre fabric? These usually come in rolls at least one foot wide. I am looking for large pieces to make my own CF hood and doors for my FC. Its a long term project.

I'll be...

DIY Water powered car

Lets bring down the price of oil!!!!

Recently got a Malay scientist create Hydroxene.. the fuel+water-powered car which can reduce FC by 50%.

We oso can DIY it. Check out...