Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="6UE5t" data-source="post: 1063830857" data-attributes="member: 103722">IMHO (but note that I'm a newbie ya) for the front, you still make it full range, meaning you bypass the HPF. The reason is because you don't have a sub yet (and assuming your modbass in the rear is not larger than 6.5 inch), so you should try to maximise what ever bass you can still get. If you set the HPF high at the front, I'd think the overall sound of your system will be too weak and thin. More over if you set it like that and try to rely on the rear midbass for the full bas duty, then your sound staging will get pulled to the rear so it will be all over the place which to me is not good. Or another option is just to set the HPF at the front to be pretty low, say at 40Hz, so that it helps limit your front not to overwork producing too low frequency bass which is supposed to be for sub.As for the rear, since you only have midbass, ideally you need to limit high & low frequency using band pass filter. Since you only have HPF, then again I suggest you set it at a pretty low frequency, say 40Hz again so that you get some bass again. Then on top of that, it's better that you set your fader control more to the front, say at around 65-80% position to the front, cause you should make your sound staging & imaging more to the front. If you leave it 50/50 in the middle, then the sound will get pulled a bit to the rear so again the sound staging will be more messy.As for your EQ question, it's all up to your ears so we cannot tell you which would sound the best since everyone has different taste and we also cannot hear your system. So everything might need to be adjusted depending on how your system sounds and how you like it to be. In general, the larger the bell shape in your EQ (which is dictated by the Q factor setting), means your setting will have a broader frequency effect around that center frequency. If the shape is narrower, that means your setting will be more focused toward that center frequency with less/more minimal impact on the surrounding frequencies. Setting EQ will take quite some time so you need to be patient.My suggestion is minimal you need to get a bandpass filter for your rear midbass. But of course it will be way much better if you get a power amp and a sub (minimal 10 inch). <img src="https://zerotohundred.com/forums/styles/default/xenforo/smilies/biggrin.gif"  class="smilie" loading="lazy" alt=":biggrin:" title="Biggrin    :biggrin:" data-shortname=":biggrin:" /></blockquote>

Verification

The Marketplace Latest

Toyota harrier 2022 G
- Started by ae92joon
- Cars for sale
Honda jazz fit gk flrs body kit
- Started by jeff6126
- Exterior and Body
Honda Civic FC Varis GTwing spoiler
- Started by jeff6126
- Exterior and Body
BMW E60 M5 front kidney grille
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front bumper skirt
- Started by jeff6126
- Exterior and Body
Honda city rear skirt repair
- Started by jeff6126
- Exterior and Body
Honda Civic fc TypeR front bumper set
- Started by jeff6126
- Exterior and Body
Proton Persona ~accident repair ~spray painting...
- Started by jeff6126
- Exterior and Body
rim spray (glossy black)
- Started by jeff6126
- Exterior and Body
AMG A45S Mercedes Benz 2022 A45
- Started by aycy
- Cars for sale

Posts refresh every 5 minutes

where to repair sr20 engine in Miri?anyone can advice?

Need someone help repair sr20 in miri..tq

Na , turbo or supercharger

Hello everyone here, im not own any Z but i really2 like this car...sifu2 or mahaguru here juz wanna ask for the knowledge....which one is better for z engine? is it let the engine gud in Na full modified or force...

[FS] S15 rear light

Good condition,no scratches.Good to keep as spare...

Price:SOLD

Contact:016-2217111

Location:S'ban/kl

http://i6.photobucket.com/albums/y239/bvalve/parts/S15rearlamp.jpg