Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="Missile" data-source="post: 2818408" data-attributes="member: 60538">finally got around to doing a little work on the car last weekend coutesy of some motovation spikes... the car had not been driven since late november last year i believe so the car was always going to have a little wildlife scattered through it... however after being back down on the driveway for some 20 minutes i discover this...http://memimage.cardomain.com/member_images/10/web/682000-682999/682368_146_full.jpgnone the less all water leaks problems are now solved and the car is back to turnkey oporation... also while i was at it i replaced the factory mitsi thermo with a davies craig item to free up a few inches of room for an better designed intake... not only is there plenty more room now but fark me those davies craig fans throw some air about... below is a pic of the difference in 'depth' of the two fans side by side...http://memimage.cardomain.com/member_images/10/web/682000-682999/682368_151_full.jpgand but beautiful job at wiring the new fan with all factory connections... im stoked with how it turned out as i am not the handiest man with the soldering iron...http://memimage.cardomain.com/member_images/10/web/682000-682999/682368_153_full.jpgfactory intake pipe along side new stainless item (bov return has since been welded on)http://memimage.cardomain.com/member_images/10/web/682000-682999/682368_150_full.jpgintake removed and new thermo installed... soooo much more room to play withhttp://memimage.cardomain.com/member_images/10/web/682000-682999/682368_154_full.jpgand this is basically the end result:http://memimage.cardomain.com/member_images/10/web/682000-682999/682368_139_full.jpgnext job is to start tidying up the wiring in the engine bay... also going to replace the bov return for a tidier item... and then from there i am in the planning stages of fixing up the exterior of the car... watch this space...</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body
Nissan Almera Tomei body kit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

World famous tuner Gemballa closes its doors after owner/founder goes missing

https://www.zerotohundred.com/wp-content/uploads/2010/05/gemballa-600x480.jpg

We reported in early February that the founder of famous tuner Gemballa has gone missing in South Africa and now over three months later...

August "Mitsubishi Performance Gathering"

The date is not comfirm yet till all the Mitsu club heads gather for a Meeting regarding this event!!!

Mitsubishi Clubs Attending this event:

MLOC (MITSUBISHI LANCER OWNER CLUB)
MEOC (MITSUBISHI EVOLUTION CLUB)
MAC...

How Much Boost can a GTI hold

Hi all Sifu,
How much boost can a stock GTI engine hold without lower comp but with unichip and fuel reg.