Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="cosmicgate" data-source="post: 3420341" data-attributes="member: 18814">hello bro i can't say i'm a pro but gauging from your situation you should check on the followings:a)your AFMb)timing beltc)cam angle sensor (cas)d)clutche)aac valvef)compression?i know i had same problem before.Your case really sound like AFM problem and i dunno why u wanna install EIDS in the first place =-(.My case alot of mechanics check everything also can't find the problem, in the end i found out that if i press down the air filter the rpm is different, i let go, rpm different again. so i took out the afm, i check it, everything seems to be okay, clean it with carb cleaner, doesnt fix the problem. So i got bold, i took off the afm, cut open the afm to get to the board, i noticed that one of the wire inside has broken off. I googled around and found out that it is the signal feed wire, no wonder my car sometimes dun wanan start, stops at humps etc. I bought a cheap solder and solder that wire back and guess what? no more problems on my car! It is as simple as that! when mechanics can't even find what's wrong! Unfortunately u have to "cut" open the afm box to get inside loh, could be pretty tricky but if i can do it why can't you? another alternative is get someone which u knwo has good afm and change it and see if it fix the prob o not.i know another case, of my friend. He send to alot of mechanics all of them also scratch head dunno whats wrong.everything seems perfect! Until he got frustrated go back home, wasted all resources he really dunno what to do already so he got ambitious and open up his cam belt cover just to find his cam belt slacking like long foreskin. The belt is so stretched that it "jumped" tooth, causing all the silly stallings etc. He replaced the belt, adjust the cam angle sensor gues what? fixed it. Another case of, mechanics looks like monkey but he managed to found the problem out of ramdom luck.3rd case...same like timing belt case but somehow ur cas just "run" position because of timng belt stretch or cas not tight enuff? weird if u ask me, but there really is such case!!!4h case, really really weird case.Not really sure about this one but a misaligned clutch can cause stalling? Not sure about this one, but somehow i got a friend who changed clutch, after 6 months the gearbox/clutch starting to act weird. On 1st/2nd have to press gas pedal abit before release clutch if nto will sei for something like that...not really sure about this case can have a look also.5th case, aac valve dirty. Sometimes aac valve gets dirty because of years of usage and builup. Can cause hunting also if it isn't afm problem. You can use the "improper" way of open the gate of AAC valve bigger so can bypass all that clogging inside.Interim solution loh but if u want can take it out and give it a good cleanup. also then u need to tune it back to proper rpm.eg:disconnect aac valve feed, turn some screw in ecu full anti clockwise and plump in aac valve feed and tune.for more info google.com6th case is lousy compression in cylinder, or cylinder not firing at all. You will feel that the car is super suddering not because of the grunt of the engine but its from ur cylinder not firing at all or problem with cylinder. i THINK this is the most unlikely case lah coz im sure ur mechanic will know if he's a mechanic but....u wont know *roll eyes*by the way bro, just some advice from me, not really expert but i think these some pointers might help u on the look out at the more common "missed" problem.If theres anything wrong, please correct me！ knowledge sharing is caring!!</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body
Nissan Almera Tomei body kit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Toyo Proxes R888r UHP

Goodday zth brothers,

Just sharing what i stumbled upon earlier today...

Idling problems....again

Hi guys,

Ive had problems with my idling(engine stops when unstable) for quite sometime. I took the effort to take my Altezza to Trial and got the MAF sensor replaced with a new one. Magically the problem got fixed...

Enkei RPF-1

anyone got contacts or 'lubang' to get 16"x7 PCD 114.3 4 holes enkei rpf-1?

thnx..please PM me..tq

Search

Enjoying Zerotohundred?

Log-in for an ad-less experience

Reply to thread

The Marketplace Latest

original rare Rays Volk Racing TE37 SAGA S-Plus...

original Swift Springs rear strut bar set made in...

Proton Preve R3 body kit

Perodua Ativa gear up body kit

BMW F10 Mperformance front skirt lip

Honda Civic FC fk7si front bumper set

brake caliper spray

BMW F30 M3 bodykit/diffuser set

Perodua Axia Rahmah bodykit

Nissan Almera Tomei body kit

Posts refresh every 5 minutes

Recent Posts

Toyota Malaysia Enters Regional GT Racing with TGR Racing Malaysia

Home Win and Double Podium for Akash Nandy at Sepang Season Opener

Darker Design : Mercedes-Benz Launches GLA Nightfall Edition in Malaysia

Honda Malaysia Doubles Down on Hybrids: New CR-V Launches with Dual e:HEV...

BateriHub Reaches 200-Store Milestone, Becomes Malaysia’s Largest...

Search

Online now

Enjoying Zerotohundred?