engine mounting.

[twistedichc]

just to inform, just change my kelisa mounting for RM957.00 excluding labour @ Perodua. Last year change OEM for RM400.00 couldn't last for a full year, hope this "ORI" one can last till 6 years like the stock when i purchased the car out from factory.

 

[^pomen_GTR^]

just to inform, just change my kelisa mounting for RM957.00 excluding labour @ Perodua. Last year change OEM for RM400.00 couldn't last for a full year, hope this "ORI" one can last till 6 years like the stock when i purchased the car out from factory.

this is what i did whenever my car need new mounting/bushes...

buy oem/normal one...then fills the gap with silicon (those windscreen silicon glue)

definately would last longer than ori mounts/bushing..and much cheaper than buying those race mountings/bushings

 

[DanzEterna]

wah so expensive ah? last time my MMC moutings for perdana costs RM45 per pc.

rm45 x 4 = RM180
labour RM60

total RM240.

much more cheaper then kelisa hehe

 

[^pomen_GTR^]

wah so expensive ah? last time my MMC moutings for perdana costs RM45 per pc.

rm45 x 4 = RM180
labour RM60

total RM240.

much more cheaper then kelisa hehe

labour more expensive that parts maybe... its a k-car


and so called "perodua" service center

 

[dking91]

this is what i did whenever my car need new mounting/bushes...

buy oem/normal one...then fills the gap with silicon (those windscreen silicon glue)

definately would last longer than ori mounts/bushing..and much cheaper than buying those race mountings/bushings

then it will become "FULL RUBBER" mounting right?? can be applied on other mounting??

 

[egb18c]

i used the silicone as well in my car,
but there is another option, to use 3M window weld. Its much more stronger and harder than silicone but the problem is its really hard to find in Malaysia, searched it at Ace hardware also dont have

 

[twistedichc]

wah so expensive ah? last time my MMC moutings for perdana costs RM45 per pc.

rm45 x 4 = RM180
labour RM60

total RM240.

much more cheaper then kelisa hehe

every proton fren says like "aaaa"

---------- Post added at 06:04 PM ---------- 6 hour anti-bump limit - Previous post was at 06:01 PM ----------

labour more expensive that parts maybe... its a k-car


and so called "perodua" service center

my labour RM165 + RM135 (iridium plug rm45x3)

 

[vr2turbo]

wah so expensive ah? last time my MMC moutings for perdana costs RM45 per pc.

rm45 x 4 = RM180
labour RM60

total RM240.

much more cheaper then kelisa hehe

Chop shop right? Mr VR4 mechanic also got for me at RM50....

---------- Post added at 07:46 PM ---------- 6 hour anti-bump limit - Previous post was at 07:46 PM ----------

this is what i did whenever my car need new mounting/bushes...

buy oem/normal one...then fills the gap with silicon (those windscreen silicon glue)

definately would last longer than ori mounts/bushing..and much cheaper than buying those race mountings/bushings

Bro. pomen,
Won't vibrate? The empty space supposed to be for free play...

 

[DanzEterna]

VR.
brand new la...spare part shop somewhere in jalan ipoh, mechanic under a huge cherry tree.
the pomen told me to go buy myself at the shop just beside his workshop only.

 

[^pomen_GTR^]

Chop shop right? Mr VR4 mechanic also got for me at RM50....

---------- Post added at 07:46 PM ---------- 6 hour anti-bump limit - Previous post was at 07:46 PM ----------



Bro. pomen,
Won't vibrate? The empty space supposed to be for free play...

if teflon/full rubber type yes it vibrate...this one feels like oem.....a bit firmer but last much longer...

can be applied to any mounts/bushings with similar pattern

---------- Post added at 03:33 PM ---------- 6 hour anti-bump limit - Previous post was at 03:23 PM ----------

then it will become "FULL RUBBER" mounting right?? can be applied on other mounting??

still not full rubber....half rubber-half silicone

 

[vr2turbo]

VR.
brand new la...spare part shop somewhere in jalan ipoh, mechanic under a huge cherry tree.
the pomen told me to go buy myself at the shop just beside his workshop only.

MMC mounting at RM45....wow!

---------- Post added at 05:15 PM ---------- 6 hour anti-bump limit - Previous post was at 05:14 PM ----------

if teflon/full rubber type yes it vibrate...this one feels like oem.....a bit firmer but last much longer...

can be applied to any mounts/bushings with similar pattern

Thanks, need to mod my Hyundai mounting. Really expensive....

 

[twistedichc]

Just to inform, rechecked my iridium it's Denso's

 

[twistedichc]

haha just bumping my ol' thread

wifey lenovo wit tapatalk

 

[wsonny]

VR.
brand new la...spare part shop somewhere in jalan ipoh, mechanic under a huge cherry tree.
the pomen told me to go buy myself at the shop just beside his workshop only.

Bro Danz... where is the workshop address? send me PM pls thank u

 

[DanzEterna]

Bro Danz... where is the workshop address? send me PM pls thank u

that was long time ago...I only went there once cos my father In law recommend it to me.....
the only thing I know that is they service a lot of taxis & located under a huge tree.

u wanna buy parts or survey workshop?

 

[vr2turbo]

that was long time ago...I only went there once cos my father In law recommend it to me.....
the only thing I know that is they service a lot of taxis & located under a huge tree.

u wanna buy parts or survey workshop?

hmmm.... repair taxi places must be cheap. Another friend recommend the PJ section 8 shop for battery purchase, say a lot of taxi one.....:hmmmm:

 

[DanzEterna]

hmmm.... repair taxi places must be cheap. Another friend recommend the PJ section 8 shop for battery purchase, say a lot of taxi one.....:hmmmm:

where is section 8 ah? at least I know a place to buy my batt incase it kong.

 

[vr2turbo]

where is section 8 ah? at least I know a place to buy my batt incase it kong.

From PJ Old Town on Jalan Penchala, turn left at Police Station traffic lights, go up hill, the shop on the right. But lately pass by there did not see much taxis around, not sure if they have shifted.
I buy from corner spare part shop (Bay Brothers). Asked the other shops, all same price....haha

 

[DanzEterna]

From PJ Old Town on Jalan Penchala, turn left at Police Station traffic lights, go up hill, the shop on the right. But lately pass by there did not see much taxis around, not sure if they have shifted.
I buy from corner spare part shop (Bay Brothers). Asked the other shops, all same price....haha

I usually buy my batt from the spare part shop near my hse, very efficient, open 7 days a week from morning to night a lot of ppl summore. previously bought ns40 for rm90 if not mistaken got 1 year warranty, but no brand la......but at least got warranty. other branded once costs double the price.


will go check out the shop u mentioned.

 

[vr2turbo]

I usually buy my batt from the spare part shop near my hse, very efficient, open 7 days a week from morning to night a lot of ppl summore. previously bought ns40 for rm90 if not mistaken got 1 year warranty, but no brand la......but at least got warranty. other branded once costs double the price.


will go check out the shop u mentioned.

Fuh! No brand one?? Then sure cheap loh.....