ecu computer box question

[D_clothes]

SifuSSSS , need all your advice on computer box .
how much would a stock b16a manual computer be ?
i don't know much on computer box andn ecu can anyone advice something which is not too expensive but yet usable and tuneable .

now i have b16a auto computer box which will cost me
300 just to modified to suit with the manual transmission.
so overall with a tight budget , i need one computer box which is able to support . Can any sifussss advice ?

 

[akuma]

D_clothes,
whr u frm?prolly u wanna try Sunway area.u might b able 2 strike up a swap-ECU deal.....a stock manual ECU cud cost prolly ard 400-500...btw,is ur d small V or big V??....diff u know?....OBD0 n OBDI....but i assume urs is big V lar hor?n stock ECU kenot tune 1 ler..u need a piggyback like SAFC/VAFC/SAFR/SMT/n mcm2 lagi lar..ahahahhaa
cheers

 

[D_clothes]

Akuma ,

I am from penang . Manual ECU cost around 400-500 not include trading in rite ?
My is Big V , yeah i know you need a VAFC to tune but aren't they are many type
of ECU with various kind of coding ?

Which am i suppose to know which is which ? and its suitable ?

 

[xxxx]

urs is obd1 or obd2?

see the code at the side of the ecu.....

ur b16a from eg or ek?

 

[D_clothes]

OBD1 or 2 ? what's the diffrence ? And what does the OBD stand for ?

My is from an B16A EG but auto , i open the computer box and see inside it seem there is 2 platform (like 2 level) .

 

[xxxx]

the code is under the bar code outside of the box.....dun need to open it...
ur car manual or auto?

PG6 : 88-89 Integra (all makes)
PM5 : 88-91 Civic/CRX DX
PM6 : 88-91 Civic/CRX SOHC Si
PM7 : 89-91 DOHC ZC (JDM 'EF' ECU)
PM8 : 88-91 CRX HF
PR2 : 89-91 ZC (Euro)
PR3 : 89-91 JDM B16A EF8/9
PR3 -J00 or J51 : 92 JDM Integra B16A EF8/9
PW0 : 89-91 JDM B16A EF8/9 DA6-XSi
PR4 : 90-91 Integra LS/GS
PS9 : 88-91 4 door Civic EX Auto
P05 : 92-95 OBD-1 Civic CX
P06 : 92-95 OBD-1 Civic DX
P07 : 92-95 OBD-1 Civic VX
P08 : 92-95 OBD-1 Civic D15 JDM
P0A : 94-95 OBD-1 Accord EX
P13 : 93-95 OBD-1 Prelude Vtec
P14 : 93-95 OBD-1 Prelude Si (non Vtec)
P27 : 92-95 OBD-1 EG JDM Civic 1600 sohc
P28 : 92-95 OBD-1 Civic Si/Ex
P30 : 92-95 OBD-1 DelSol DOHC Vtec Si/EG SiR
P54-G31 : 1997 Honda Accord 1.8 LS
P61 : 92-93 OBD-1 Integra GSR
P72 : 94-95 OBD-1 Integra GSR
P72 : 96-00 OBD-2 Integra GSR
P73 : 96-00 OBD-2 Integra Type-R (JDM & USDM)
P74/75: 92-95 OBD-1 Integra LS/GS
P75 : 96-00 OBD-2 Integra LS/GS
P2N : 96+ OBD-2 Civic HX Coupe
P2P : 96+ OBD-2 Civic EX Coupe
P2E : 96+ OBD-2 Civic DX Coupe
P2M : 96+ OBD-2 NZ Civic SOHC VTEC
P2T : 99+ OBD-? Civic Si Coupe
P5P : 97-00 OBD-2 Prelude Type-S (JDM ECU)
PBA : 97+ US Acura 1.6EL
PCT : 98+ JDM ITR / CTR
PCX : 99+ OBD-? S2000

 

[akuma]

D_clothes,
meaning urs is P30....very common..n d so-called "2 level" is ur knock sensor board ler...all stock DOHC VTEC ECUs has it....n wat coding r u toking abt?....just get urself a manual ECU,prolly a VAFC n ur ready 2 tune ur car.....

 

[D_clothes]

Yeah ,

But that is the big question . for Manual B16A ecu izzit P30 as well ?

Because i see some of my friend same Engine but come in Manual the computer box a bit bigger but only 1 level .

And also is there any diffrent in Obd1 and 2 ?

Brother X my Computer box is auto B16A that' why i need to change .

I went and ask whether the auto is able to be modified , but the price is expensive .

 

[xxxx]

got differences in obd1 n obd2.

just get a manual p30 ecu ler.....prepare rm400 to rm500.....haha

or get a aftermarket rechipped ecu then a vafc to tune it....

 

[D_clothes]

okay so P30 ecu is about that price .

What is the diffrent with single platform and the one with 2 level platform ?
How i know is a P30 ecu ? Cant it be a modified auto one as well ?

 

[EGfan]

Yeah ,

But that is the big question . for Manual B16A ecu izzit P30 as well ?

Because i see some of my friend same Engine but come in Manual the computer box a bit bigger but only 1 level .

And also is there any diffrent in Obd1 and 2 ?

Brother X my Computer box is auto B16A that' why i need to change .

I went and ask whether the auto is able to be modified , but the price is expensive .

Yes, Manual and auto both are also P30.
USDM and JDM P30 ecus are different in size. Read this http://www.autoserve.8m.com/StepByStep_OBDI/Chip_Installation_OBD_I.html
The cheapest way to go around is buy the chipping kit..i think RM30plus, get someone good with soldering/electrical engineering and modify the ECU. The fact that your ECU is auto, makes it easier to do it. I've actually done this mod myself. But you gotta take the risk of burning it le... After this , just get a racing chip like Feels, Mugen or Spoon then only use VAFC to fine tune.

 

[xxxx]

bro,

can u type out the code under the barcode of ur ecu?

to differenciate, the numbers with 9xx is auto.

0xx is manual....

so can u type out urs?

just asked a few shops....

1. manual p30 = rm700....

2. manual ori spoon p30 = rm1000....

i believe can find around rm600....

haha.....i guess u have to save more money...hahaha

 

[D_clothes]

brother xxxx , super expensive need to save loh.....
at the moment i just using 1 computer from my mechanic , malu la borrow so long form him already .

Brother EGfan ,
That is good information you provided on the visual of the computer box .
Then i guess my is JDM version . Where can i get those component from ?

All ,

If any one got any stock b16A manual which 1 2 sell do let me know , but would like to trade in as well .. ...

 

[EGfan]

The cheapest way to go is still DIY,
1st option
Trading in your ECU with the chipped socket = RM500-600.
Buying another chip from the shop RM200, but you can get cheaper outside (PM me i'll teach you)
2nd option DIY. Email the person on the website, he will deliver to you. I bought 3 years back only USD10 =RM38. Pay someone to solder RM100?
Buy racing chip (PM me i'll teach you)
Spend less than RM200...hahaha

 

[D_clothes]

brother ,

Where is your location ? hahahahah

Will PM you for help .
And how much is the racing chip ?

 

[EGfan]

I'm around Klang/Subang/PJ

 

[D_clothes]

aiduh so far ...

wat's your number ? may b you can do mine for me ...

brosss anyone u know want to sell their ecu plz let me know
0124121293

 

[EGfan]

aiduh so far ...

wat's your number ? may b you can do mine for me ...

brosss anyone u know want to sell their ecu plz let me know
0124121293

0122810451. My hands shake now, not a good idea to do soldering.

 

[hattech-v]

i got p30 ecu manual or auto...
p30 manual RM550.
for chip n tuning pm me for details....

 

[D_clothes]

brother hattech-V do u accept trade in ?

EGfan , hahahha dont worry juz to exchange knowledge wont ask you and presure if that is not the last choice hahahah .