Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="shiroitenshi" data-source="post: 3005241" data-attributes="member: 27518">Well, 2.25 inch is the common size in Japanese exhaust sets, so no problem with that even if you go 2.3 inches. What kills power is probably the bends and kinks if it's not mandrel bent.VTEC not much modding required, unless you go turbo.. The stock one output is also good already. and any mods after that will sacrifice fuel efficiency and noise for power.Basic mods is always the intake, open pod like yours is okay, and exhaust set including the extractor. If you are having white tips on your plugs, get VAFC or fuel regulator for a quick and/or dirty tune of the fuel maps.Other things make such a marginal difference, I don't think it's too much of a concern, just remember that some parts are 'wear and tear' items (plug wires don't last forever, nor do oil seals, distributor internals (igniter) etc. etc.Amazingly, I'm still running with the same distributor after 240,000 kms +.. Now I'm getting worried it mamposes suddenly.</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body
Nissan Almera Tomei body kit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

GT Radial Champiro UHP 1

Hi guys,
The GT Radial Champiro UHP 1 is finally here.....

Many sizes from 195/50R15 unlike the HPY model I am using that starts from...

Best Alignment Sifu in KL ?

i'm wondering wher can get the best alignment shop in KL area, so far i only knw 1 at Selayang area.... their aligment really best ... but it was too far and quite xpensive... it cost RM50 for alignment at selayang...

Where to get Z32 parts?

Hi guys,

Anybody know any specific shops/breakers that deal with Z32 parts?

Thanks