Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="servo" data-source="post: 150663" data-attributes="member: 1665">ayai!! still need pictures...easy one la...on the standard air box there were one hose that back to crankcase......usually people that using Ram pipe don't have to connect back to RAM pipe....so use the small air breather la(k&N/simota)..like this one..... :lol: http://img34.exs.cx/img34/5228/Micra11.jpgso if you still using OEM air box also can do this....but at the end of air box just seal it.....</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body
Nissan Almera Tomei body kit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Newey's latest creation could shatter Suzuka's F1 lap record by 20 seconds!

https://www.zerotohundred.com/wp-content/uploads/2010/09/Newey.jpg

Adrian Newey's latest creation is capable of beating the formula one lap record at Suzuka by a staggering margin of 20 seconds.

Red Bull...

Ready 2 Race Turbocharger by Bullseye Power

Bullseye Power turbocharger Model S368 with race cover 9.5 inch compressor housing
suitable for drag purpose rated Hp 500 to 900whp

inducer 68mm with ETT technology by Borg Warner
Turbine Wheel 83mm
Turbine Housing...

replace clutch plate for GTR R36 will be much easier!!!!

guys from the pic shown in the links, u can imagine how easy to replace a clutch plate for the coming r36 gtr compare to the previous gtr's. just need to loose the longshaft n the clutch housing. 1 guy can finish the...