Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="Izso" data-source="post: 1064156980" data-attributes="member: 2429">I'd suggest you shop around first.A well setup and matched 2-way can do pretty well on its own but compared to the much more expensive well setup 3-way, it'll be outclassed la. 3-ways can be a pain in the ass to tune in terms of speaker positioning, crossover points (if not using passive) and placement of the speakers themselves if you drive a small car. Personally I'd just stick with 2-way first.Also I'd suggest the following : Sound proof doors, custom door panel, 2-way components powered by a class AB amp, sub powered by a class AB monoblock. And depending on the brand of the components, you'll be surprised what a high end 2-way can do. The 2-way highest end Sinfoni components will outshine a lot of brands you'll come across. Heck even my Dynaudio 240 MKII will do better than most brands out there. But the way these two sound are like day and night and depending on the amp you use to power them, they may or may not be to your liking.Instead of going to shops, you should mix around with ICErs and test try their cars and their speakers. Then only decide which one makes you happy, find out who the installer is and go to that person and ask for the same or similar setup.</blockquote>

Verification

The Marketplace Latest

original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body
Nissan Almera Tomei body kit
- Started by jeff6126
- Exterior and Body
original rare Black Racing Pro N1 16x6.5jj offset...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

Mivec 4g92 gen2 problem.

Well here is the scenario
My ck4a originally has a 4g92 sohc engine but I changed it to a mivec 4g92.

How do I confirm if its oil or fuel problem?

In a straight line everything seems fine. I'm hitting mivec but...

Ferrari unveil new logo for 2011

https://www.zerotohundred.com/wp-content/uploads/2010/07/New-Ferrari-F1-Logo.jpg

A few months ago Ferrari got into trouble with the world when allegations surfaced suggesting that the barcode in its logo was...

Nissan's AVM makes parking effortless