Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="gavan" data-source="post: 836694" data-attributes="member: 2598">actually,it all depends on your driving style, when using a 4-1 extractor, mostly people would use this setup if they are going on track often where they really push their engine to high revs and stays around high revs most of the time. 4-2-1 extractors are mostly for daily driving cars, where mid range and low range power is needed(traffic jam and all) cause if will give you some back pressure to go at low RPM.why i said 4-1 extractors are used mostly for high revving engine if because when you high rev, you need the air to travel fast(not comparing stock 4-1 extractors here as stock 4-1 extractors are designed differently from aftermarket ones) so the air flow is slightly more free and those 4-1 extractors, each individual pipe before it reaches the 1 piping is longer, way much longer compared to those of a 4-2-1 extractor where the 2 is longer than the 4 ;) thats what i have observed when i see 4-1 and 4-2-1 aftermarket extractors.anyhow also, please do make sure the extractors you are getting are good design ones as badly design extractors would only increase your fuel consumption and sometimes, dun even give you that extra power you are loking for ;) happy hunting ;)</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body
Nissan Almera Tomei body kit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

What good on Tomei Arms Turbo M7960 on Evo?

http://www.tomei-p.co.jp/_2003web-catalogue/000_arms/image/turbinekit_4g63/arms_4g63_main_b.jpg

Anyone know or can share what goods on Tomei Arms Turbo M7960 on Evo 7-9, if compare to stock Turbo ?
So far I only...

Evo X share

i just get my evo X'09 SST version... can anyone share what engine oil is best for my car...? and where do evo in kl area do their service...?

btw... if i use engine oil like Shell Helix Ultra 5W-40...is it good...

Nissan opens new Oppama test track