Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="mADmAN" data-source="post: 1064442187" data-attributes="member: 4286">1/ try motortakaful.com .... thats where i insure my 95 honda...its etiqa takaful iinm.2/ pro3 requires quite a high compression to get any power out of it. B16B piston wont be enough to give it the compression it needs. would recommend Toda C2 or Skunk2 Pro2. take note that i have a friend with a B18C-R with 12.5 compression with Pro2 and his VTEC point is at about 7krpm. otherwise wont make any power when set the vtec point lower. i also have another friend with a b18cr with skunk2 tuner 2 cams and making pretty decent amount of power.... take note than when using aftermarket cams, advisable to have adjustable cam pulleys for fine tuning and also aftermarket timing belt like power enterprise or gates racing so that it doesnt break before 80k km... my mechanic told me if i were to fit toda c2 and wanna use honda oem belts, must change every 40k km max.perhaps u should google for suitable cams for stock bottom B18C-Rb16b piston is a pretty decent upgrade. but quite costly to get it fitted. upah je dah lebih harga piston bro... blom masuk engine oil, gearbox oil, aircond gas etc.id recommend skipping the b16b piston for now, and get a PnP job done. would be beneficial for the high cams.... b16b piston can masuk later if the engine requires overhauling or somethingS300 = good shit.standard clutch, id recommend something better like the exedy stage 1 or exedy stage 2 (3 or 4 puck) as minimum...but the stock clutch is pretty decent.h22a injectors oso okinstead of works, get skunk2 alpha throttle body... and port match ur intake manifold... take note that stock type r intake manifold has a limit it can be port matched... 68mm if not mistaken.... if u get 70mm throttle body, id advise getting skunk2 intake manifold as well and port matching it to 70mm...another favourite option for throttle bodies is the Super90 Throttle body.spark plugs, up to u... but iinm vtecs use range 7 plugs... OEM plugs are NGK - BCPR7E-11 if not mistakentiming belt already mentioned above.air filter again up to ur choice... but... if u have the type r air box... would recommend u check out these DIY Icebox Cold Air Intake mods.<a href="http://www.clubintegra.com/board/showthread.php?t=10918" target="_blank">DIY: Icebox how-to - ClubIntegra.com - Acura Integra Forum</a>http://www.team-integra.net/forum/19-projects-diy-article-talk/125609-improved-diy-icebox-style-cai.htmland just change the filter element to something like K&N or something.aluminium rad is ok... but personally.... stock radiator is good enough... perhaps look into low temp thermostat and low temp fan switch.....but if ur having overheating issues, u should get that sorted first before doing any mods.arp head stud = good shit.another thing u should look into is oil pressure. quite important for VTECs.. but usually stock oil pressure is ok for type r as they are supposed to have a higher pressure oil pump. otherwise, there is a simple mod out there that u can do to increase the pressure... involves a washer in the pump.. not sure if its applicable for type r... but try researching it.</blockquote>

Verification

The Marketplace Latest

original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Second Generation Volvo XC90 Cancelled

http://www.autoblog.com/media/2007/12/xc90-web.jpg

It’s a pity, I always believed that the XC90 was a good looking car, and thought the T6 was a really powerful ride. I even thought that it was selling well and that...

2007 Malaysian F1 Grand Prix: Kovalainen Can Surprise all in Sepang

ROOKIES HAMILTON, KOVALAINEN CAN SURPRISE IN SEPANG

Having competed with Lewis Hamilton and Heikki Kovalainen in the GP2...

Fuel Consumption

Just curious...

Whats your fuel consumption...do share and do include what have you done to the car =)

Would love to know the FC for silvias particularly S15s and 180SX with SR20DETs....Cheers