Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="drexchan" data-source="post: 1063750119" data-attributes="member: 6936">Dude, overlapping between the exhaust and intake stroke is the basic event what a cam modder is looking forward to change lah... What those numbers 262/288/2xx mean when we talk about cam profiles? It's the overlapping duration in cam degrees. If there isn't any overlapping the engine is useless in automotive term.Higher degree of overlapping is what making all the extra horses even the standard camshaft has overlapping. Performance cam overlaps more for longer intake and exhaust event. Exhaust scavenging will aid intake charging so having overlap is good.More overlap makes high rev power, less overlap makes good low rev torque and best idling quality is with minimal overlap. Therefore VVT/CVT/VTEC/MIVEC/etc are invented to change the overlapping at different rev range and engine load.The problem here is not with the camshaft or the tuning of it.When we talk about knocking, the 4G15 is one of the most robust engine running around with knocks. Seen those Iswara/Wira that are being driven by lazy drivers who never bother to drop shift after a corner around a taman?I personally think that all he need is increasing the fuel pressure. 4G15 is known to burn lean, too lean. Lean burning + blow back contamination is what causing the knock. Not the cam profile.---------- Post added at 09:28 PM ---------- 6 hour anti-bump limit - Previous post was at 09:20 PM ----------As long as the cam lobes are reprofiled to the specification with accuracy in control, and the surfaces are treated by either nitriding or brickering then a reprofiled/reground camshaft is as good as a billet. After all, it's the same grinding and hardening process that they use to make the so-called billet shafts out of a blank shaft.A poorly made 'billet shaft' with base circle too big or lobes too high, without precision is even more dangerous to use.</blockquote>

Verification

The Marketplace Latest

original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

[WT Ask] Max boost GSR 4G93 + Boost Lag

To all Sifu
i have Waja ck Turbo 4g93
with 1.5mm metal Upgrade
can i ask whats da highest boost for me ?

coz i seems like having a little boost lag
how to solve that ?

RX7 Video Clips

Pls post all your rx7 video clips here. Pls post only YOUR OWN VIDEOS, be it yr own car or yr frens, but not anything u grabbed online. Thanks

DIY: fixing loosen player head...

im using pioneer cd player wf flip down function...

the head is loosen and will always flip down when i click it or attach it back...

any solution?plz help...thanks...