Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="wirahybrid" data-source="post: 4379737" data-attributes="member: 82932">hi there, i was also planning to do the same type of arc induction box during my sem break.. the type of material that i was planning to use was aluminium(haven't decided on wat size yet). method of doing it:1)first method:i was planning on making a template out of card board first with all the mounting holes indicated then cut the corresponding pieces out of aluminium sort of like a jig saw puzzle, take the pieces to a nearby exhaust shop that does intercooler piping and have them weld it together...2)second method: using the same template, open it up till i get a single flat piece. transfer the template onto a sheet of aluminium and cut it out. i had two ways of putting it together:a)first is the same as the above; have them weld up all the joints..b)other way was to actually to have extended sides(circled in the example pic attached)-not sure what the proper term for it..:stupid: ... drill holes on those extended sides and to its corresponding sides to be attached with and rivet it... then take it to the exhaust shop to have the edges welded for proper seal... then have a 3" hole cut out and an aluminium pipe of desired length welded on.. and mount it at desired positionbt my only question is in the design there seems to be only one hole, so i'll be assuming the hole is connected to the MAF sensor via a short length of flexi hose.. but where will the air be sucked in. i can see a square at the front so i'll be assuming that where the air comes in. just to share with you(hope you dont mind :hmmmm:) my design in mind was to DIY a custom headlight out of fiberglass with a projector lamp on the right side(drivers side headlight; towards the grill side for wira,putra,satri) and a CAI funnel next to it connected directly to the airbox.. the airbox will be placed where the battery was (moved mine to the trunk)... this is just my 2 cents... hope u dont mind me sharing<img src="https://zerotohundred.com/forums/styles/default/xenforo/smilies/biggrin.gif"  class="smilie" loading="lazy" alt=":biggrin:" title="Biggrin    :biggrin:" data-shortname=":biggrin:" /><img src="http://zerotohundred.com/forums/styles/default/xenforo/smilies/burnout.gif"  class="smilie" loading="lazy" alt=":burnout:" title="Burnout    :burnout:" data-shortname=":burnout:" /></blockquote>