Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="rollakid" data-source="post: 1285282" data-attributes="member: 6588">heck~ no way 3K can bore up to 1.6liter lar >_< it must have been a 5K engine (1.5liter->1.6liter make more sense).okay, go double check and see if it really is a 5K engine (go check the engine number on the block, should mention it). and if it really is one, and you still have that 3K engine head, then you really got yourself a gem there.for normal people like us who want to play with toyota's old K-series engine, the easiest way to get power is to use a 5K block (1.5liter, from lite-ace van) and the 3K cylinder head (your car's ori engine). bolting on a 3K head on a 5K engine is like an instant bolt on performance part. This is because the ori K-series engine has low compresion ratio, the highest among the modal also only got 9.5:1 ratio, which is quite low. Bolting on a 3K head to the 5K block instantly give you 10.#:1 ratio (not sure about the exact figure), and if you use premium ron97 petrol, no knocking or pinging to worry about.respond is faster too, basically just like an upgrade. This mod is done over and over by australian playing old school toyota, although i didn't try it myself, but with so many sifu in australia saying it works, i assume its true. works with 3K head + 4K block combo too, probably even better for racing compare to 5K block since 4K revs better.other things that can be done:-even higher compresion ratio-lightened pushrod-high duration cam (although i dunno where to get this)-better clutch (TRD still sells them for 4k, asume they will fit anyway)-weber, nuff said-exhaust system could use some redesigning XD-other than that is more on improving handling and chasis already....</blockquote>

Verification

The Marketplace Latest

original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Looking for BBS CH or BBS RS-GT 18" for Audi A4 B7

Anyone can tell me where can i get this 2 types of rims?
BBS CH and BBS RS-GT?

Thanks...

BLITZ MSTT and EVO3 ECU diagram

anyones hv tis?

feel wanna conect the speed reading of MSTT to the car..but dun hv the diagram..las time the ppl only conect the timer function...others cant function totaly...

Changing Wira 1.5 front disc brakes

I haven't dismantled the front disc brakes before, so I'd just like to ask about this in case anyone's seen a mechanic do it.

The front disc brake has this "plate" behind the rotor, right? The plate's folded edges...