Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="Altezza33" data-source="post: 4499621" data-attributes="member: 83530">Modification :- If your into modifying the engine then buy a 6MT. More parts and cheaper than 5AT.- 5AT has less upgrade parts and quite expensive.- 6Mt can use standalone ECU like Apexi Power FC. Plug & play in the original ECU box. - 5AT can use Apexi Power FC from Brash Boy only. Run as a piggy back cos need to retain original ECU to run the gearbox.- 5AT can only use HKS SLD Type II to remove speedcut.- 6MT can most of the aftermarket speedcut remover.- 5AT can only use panel air filter. Open pod not recommended. Power loss and can damage throttle body.- 6MT can use open pod filters. - 5AT & 6MT Most owners will upgrade the suspension and anti roll bar cos original is quite soft.5AT Upgrade do and dont's- Auto : never use open pod filter as will lose power and possibly damage the Electronic Throttle Body.- Auto : Retain the orignal air box and use panel filter like K&N etc.- Auto : Used HKS SLD Type II to remove speed cut. Other brand some work some does not work.- Auto : E manage does not work cos original ECU will try to gain control of engine and transmission parameters.- Auto : Apexi Power FC tuned by Brash Boy is more suitable as a piggyback computer.- Auto : Dynojet Powercommander III works well.- Auto : Never remove the catalic convertor. You will lose low end torque. Unless have a after market computer to adjust the AFR and ignition timing.Hi Ae111, the Dynojet Powercommander III i search online is for motorbike. it is because our engine is Yamaha, so also can use? what is its function? fuel control only?what you mean by brash boy in above? is a workshop?</blockquote>

Verification

The Marketplace Latest

original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Internal wasgate

VR4 Problem.....help

Hi all,

Hope sifu sifu here can help me with this, recently i just get a wira VR4, I still new in turbo world. i have 2 question.

1) i notice the hose is not connect to any where. so...

Tony Fernandes - The season so far

https://www.zerotohundred.com/wp-content/uploads/2010/07/tony-fernandes.jpg

It's hard to believe that it's already been a year since Lotus Racing was first put together by Dato' Sri Tony Fernandes, boss of Air Asia...

Hpc 2010

anybody who wants to join HPC this year pls list down your names below:
Its about RM250 per car. but if there is about 20 cars i can get discount.
Date 25th July (Full Track)

Group 1 = with instructor (morning)...