Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="n0th1n" data-source="post: 3885242" data-attributes="member: 9249">ha, baru mau reply, sudah ada orang reply.yes, with stock engine internals as what the topic started mentioned, there will be maximum hp or torque number that can be achieved. but with modification and mechanical upgrades, the maximum number should be higher.. as i said earlier, original ecu will keep some % and potential for durability of the whole engine. they keyword is tuning proper. unproper tuning, u buy what haltek, motek, freedom ka, all cannot unleash the hidden power being kept by original ecu.and, we toyota is more keen to look at torque curve/numbers. if viteks, they measure with hp. why choose toyota if want hp? go for turbo la. or join viteks hehehhehehehhe.. will produce continous debates after this <img src="https://zerotohundred.com/forums/styles/default/xenforo/smilies/biggrin.gif"  class="smilie" loading="lazy" alt=":biggrin:" title="Biggrin    :biggrin:" data-shortname=":biggrin:" />this is another example: by bro trd.ae92 (even if there is typo error here, thats what i meant)SC14 + 4AGZE (stock) + Oversize Pulley + Haltec E6X = 175 WHPSC14 + 4AGZE (Aftermarket Piston 81.5mm + BC Rod + 272 high cam in ex ) + Oversize Pulley + Stock ECU = 175 WHPsee what a haltech can do? vs investing pistons + conrods + cams..10whp from an NA engine is big. 13-15hp at flywheel. u buy a big plot of land, but built small house.. later2 can renovate to big house..u buy a small plot of land, built maximum, then cannot renovate, have to move to another plot of land.its about maximizing potential. IF small budget la of course. ahhahahahhahahhaanswering topic starter, i never tried that adaptronic nor microtech. but, tried a friend with stock engine and a microtech, the torque is way better at low rev, didnt have chance to try on high rev.</blockquote>

Verification

The Marketplace Latest

original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

New GR Yaris Automatic & GR Supra Track Edition Now in Malaysia

UMW Toyota Motor Sdn Bhd has introduced two new models to its Gazoo Racing lineup: the GR Supra Track...

Hydraulic Lifter Noise/Tappet Noise on 4G63T

My original engine was fine and I did not have this problem until my timing belt snapped at 7500 rpm in Oct 2014. Then I had the entire head replaced from a tuned Evo 6. The head was pre-done with port polished...

Qualifying- Super GT Round 4 2006 Sepang Circuit Malaysia