Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="ikky9mili" data-source="post: 2416707" data-attributes="member: 25943">most errors are when spraying. yall should press the spray nozzle head maximum 1 second and let go. move in a left and right motion while pressing the nozzle and when an area is covered, move over to cover whole area. 2nd and 3rd coat, do the same if u wish to do so. then comes the clearcoat using the same technique. this way u dont get too much spray bleeding down and damaging the overall look. u can buy the same color as ur car color through some hardware shop but small tin and expensive price, around rm15-18. i suggest u find a "steel paint" shop and ask for ur car color code and they will give it to u in the normal tin size (rm20-23)....while ur there, get a rubber/foam waterproof sanding block for your sanding purposes. and the correct version of sanding paper is not those u get in a hardware shop but here. which is, 'kovac' eagle brand waterproof abrasive paper P80 for initial sanding and P320 for more fine sanding...u can get the autocolor cement from a hardware shop. the real process is actually red color cement than yellowish-gray color cement (the steel paint shop mustve got this as well) and lastly "autocolor hard putty" for final coat.when cementing, if say u doing ur mudguard, theres a lining usually on the metal (curves of the car/top half of the mudguard), if ur dents are below that curve, cover that up and cement the whole of the bottom half of the mudguard. this way, after sanding, u get the overall clean shave instead of tompok-tompok due to cover only the dents.hmm... good luck!:P</blockquote>

Verification

The Marketplace Latest

original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

2007 Tokachi 24 hours race winner - Sard Toyota Hybrid Supra

http://www.sard.co.jp/race_r/r2007/news/20070715_7.jpg

14th Tokachi 24 hour races/laces (7/14 15 - 16)
The Tokachi international speedway (1 lap 5.091km)synoptic customer mobilization: 37,900

Translated Text...

adjust tapped

hello guys,
is there anybody know what is the tapped clearance for civic sr4 1.6?i m willing to adjust the tapped due to noisy came out from the head,n the power felt decreasing a bit before than this.how to do...

Supercharging a Tiptronic?

Hi everybody :regular_smile:

Anybody here know of a supercharged RS200 tiptronic?

Hearing different views regarding the auto-box and the supercharger eating it up... anybody know if this is the norm or one of...