Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="synchron" data-source="post: 554504" data-attributes="member: 115">Dont think the adapter will be RM 400.00. If you were thinking of getting a single adapter the price will be atleast RM 1000.00. I have been explaining on the type of adapter available in the market.There is 3 type of 4 throttle adapter. First one is grinding out from a billet alluminium which is the most recommended one and also it looks the best. They are the most expensive way.The billet ones will cost about about RM 1000.Second type is by doing one piece thin of manifold adapter and another thin piece of 4 throttle adapter. Then join them together by welding them. Much cheaper concept but looks messy because of the welding line.The welded ones will cost about RM 800 or so, never try before but i dont really recommend it because it will have some side effect after using a while. 6061 and 7075 cannot be expose to direct heat like welding and melting. The alluminium composite will change, for example: alluminium adapter which went through welding process need skimming because the adapter composite has been change and uneven. The welded join place will become software, after using for sometime it will start cracking. Third one is by casting. The cheapest way by quantity,quality will be like original manifold.The third one is the cheapest one. Most probably less than RM 500 but need to have a huge quantities. Need to pay for the tooling cost which is the mold cost. In order to get to that price, i think you will get about 50 pieces.The cheapest standalone ecu will be from Ipoh, Mr. Leow. I think he is selling at RM1500.00.</blockquote>

Verification

The Marketplace Latest

original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

More Shots of the Carpark at Ferrari Challenge Trofeo Pirelli Sepang

305459_10150321367897169_724127168_7881463_1543950097_n-600x448.jpg

Just some of the horses during the afternoon at MSS/Ferrari Challenge Trofeo...

Turbocharging , what would you like to know ?

I would like to contribute more regarding the turbocharging topic in zerotohundred. But I would also like to know more about what are you guys looking for and what kind of information you guys need.

Please do fill...

Mazda RX-8: Review and Opinion

Put your review of the Mazda RX-8 (incl. the New Facelift) here. Give new buyers some opinions or share the experience that you have with your RX-8.

Thank you.

...