Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="EG9" data-source="post: 1679964" data-attributes="member: 396">Metal head gasket? You'll get higher compression but anyway ur cam degree will not be accurate anymore due to different gasket thickness. Power will not optimize if cam degree is not optimum. Actually it's not easy to increase N/A engine power. After metal head gasket installation, you'll not satisfied with the power coz the cam degree is not optimum, then you go and get adjustable cam pulley, after that look for tuner to set you cam at optimum degree by using cam dial gauge. From the initial step untill the last step..how much have you spend?Metal head gasket: RM320adjustable cam pulley for exhaust cam: RM650 (Toda) -New (Local manufacture unit: RM300-350)Installation fees plus setting: RM200 -RM300 (Depend on the tuner)But how many HP do you gain? 1 or 2? But definately got increase in engine respond. Port polish? of coz good if do it properly. Actually there is no short cut in engine modding.The fundamental on engine modding it to increase power output of the engine.1. Get higher engine compression2. Get optimum mixture of A/F ratio3. Aggresive ignition timing 4. Lighter and balance engine internal BUT it's not easy to achieve the above mentioned element. All also need ALOT of MONEY!!Why Vtec engine is powerful?Because the engine meet above mentioned requirement.Alluminuim crank pulley: lighter unit and increase engine respond BUT I'll not install it because it's not durable. AFter sometime it will start to wear off and become very sharp edge and cut off you belt. Not much you can gain from there. HP won't increase. Better spend the money on after market flywheel. Although the HP won't increase but power respond do increase and u can feel it immediately.</blockquote>

Verification

The Marketplace Latest

Toyota harrier 2022 G
- Started by ae92joon
- Cars for sale
Honda jazz fit gk flrs body kit
- Started by jeff6126
- Exterior and Body
Honda Civic FC Varis GTwing spoiler
- Started by jeff6126
- Exterior and Body
BMW E60 M5 front kidney grille
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front bumper skirt
- Started by jeff6126
- Exterior and Body
Honda city rear skirt repair
- Started by jeff6126
- Exterior and Body
Honda Civic fc TypeR front bumper set
- Started by jeff6126
- Exterior and Body
Proton Persona ~accident repair ~spray painting...
- Started by jeff6126
- Exterior and Body
rim spray (glossy black)
- Started by jeff6126
- Exterior and Body
AMG A45S Mercedes Benz 2022 A45
- Started by aycy
- Cars for sale

Posts refresh every 5 minutes

DIY Joey mod - Blacking out the Headlight surrounds

iPhone%2525204%252520108%252520%25255B800x600%25255D.jpg

It was a craze at some point in the past to blacken the...

DIY-Magnetic Oil Filter-NeoDymium Magnet

Hi to all forummer

This is guide for Magnetic Oil Filter-hope its helps

http://www.dokaugot.fotopic.net

Timing belt or timing chain?

Dear colleagues,

Im planning to buy a toyota Altezza RS200 year 1998. Now im working overseas and planning to bring back this car to Malaysia. Now im using a nissan skyline gtst and this car eat a lot of petrol and...